bov question

[tekon]

i am planning to get rid of my oem bov for my rb25det for an aftermarket one. And i was wondering where the tubes that connect to the old bov go when you install an aftermarket one?

here is a picture of what tubes i am talking about. the upper thinner tube i know where it goes but i am confused on the bigger one.

[Coolwhip]

depends if your routing it back to the intake or not.

If you want to vent to the atmosphere then just remove the pipe and then get a 2 liter soda cap and plug up the hole on the intake pipe and put a hose clamp around it (thats if your not replacing the intake pipe)

If you are recirculating the bov then you'll put the hoses back to where they were originally.