BOV Install questions??

[89DOHC]

ok i have the greddy intercooler and after the modifications we made on the power steering pump we cant put the BOV on the hot pipe so we decided to put on the pipe that come from the side of the intercooling piping before the IC my question is what is the easiest/best way to install these? would welding be best or is there other ways

[MojoMan]

Im having a hard time understanding where your wanting to put it at. You can put it either between the turbo and pre i.c. or post i.c. and before the throttlebody. Those are pretty much your options. I would say that if your running it with a m.a.f. setup you will want to make sure you route the blowoff valve back into intake piping between the maf and the turbo. Yes you will have to weld a flange onto the ic piping for the blowoff valve if you dont already have one.

[89DOHC]

after the hot pipe it connects to the regular IC piping and there is a lil like hose hook up type thing in the wheel well area and on that lil piece was were i was going to put it.. would it work there? and how would i go about putting in on that