Bose harness

[Trudocta]

I have a 1994 Infiniti q45t with of course the Bose premium sound. I have an Roem- 1 Bose interface by PAC 10 audio but it seems that it is pinned incorrectly. Is there anyway I can obtain the wire colors for the bose pin harnesses? I can find diagrams of the harness but if I had the wire colors it would be much easier. I am sure I have everything I need antenna adapter, correct interface and all of the Bose speakers and amps work, but I can not get this aftermarket receiver to work and it's brand new. I have learned quite a bit on different forums and this one but I need some direct help thank you

[GoadQ45T95]

Cant Help you with the colors on the harness. Any particular reason you want to retain the factory bose amps? When I redid the audio in my 95, I used a small 4 channel amp for the door/rear deck speakers. In my opinion, the bose amp leaves a lot to be desired. A small 4 channel amp blows it out of the water. Not to mention the flexibility in tuning the amp vs the limited tuning ability via the Head unit. Its a tad more work than what it sounds like your trying to do, but would be worth it if you plan on keeping the car.

[Trudocta]

Thanks for the reply. I understand that I can do that but then I need help on finding my hot,ground...ect. I can run straight off the deck with no amp just run new wire and amp my subs in the rear. But finding the juice??? Guess it's multimeter time. I have spent so much money on these damn roem-1 and 2's