Bosch 044 on rb20/s14

[MATTs14]

How exactly do you go about installing a bosch 044 inline fuel pump on an s14/rb20??? I looked around but couldn't find anything

[Joe]

why are you installing an inline fuel pump?

[Carl H]

not easily if you do it inline...you'll have to modify the stock hardline and find placement for it.I put my 044 in tank and it was a total pita to get in the tank...not to mention i had to shove a filter sock on it as a percaution even tho it has an inline filter.

[MATTs14]

Well i was reading around on some old threads and now i think im either gonna get the tomei or the supra tt pump or something.

And the reason im upgrading is because im going for 400whp and im not sure my walbro 255 can handle that

[Yellow4g63]

Look on ebay I got my Deno pump there for I think 150+shipping.

[Kansei240sx]

What about a walbro pumping into a surge tank, and afterwards going to an inline Bosch?

[Shocker]

I'm running dual pumps. One walbro intank and one bosch 044 inline with a hard fuel line running down next to the walbro for pickup. Two fuel lines running up the car. I had to add a second 3/8" line for the 044. They then go to -6 Y in my engine bay and into my fuel rail.

[MATTs14]

Look on ebay I got my Deno pump there for I think 150+shipping.

Will this bolt right up to an s14??

[gawdzilla]

Will this bolt right up to an s14??

yes, it pretty much will. i ran the denso pump before switching to the apex pump. i think the walbro (if it doesnt die) outflows the supra denso on stock wiring from lid to pump simply because it does not pull as many amps.

[Carl H]

be sure to do a fuel pump rewire w/ relay if you install the supra pump.

[Yellow4g63]

be sure to do a fuel pump rewire w/ relay if you install the supra pump.

Yeah forgot to add that. It will to 310lph rewired.

[SuicidnS13]

So the denso pump is an oem supra tt fuel pump? Does it pretty much drop right in using all our factory components?

[Carl H]

it will fit in tank, but will require some finagaling to get to fit...might have to get creative with the mounting and fitting the filter sock as it wont really 'bolt' in but works ok for most people's apps.honestly only reason i went with the 044 was because i thought my tomei r32 gt-r pump was failing when it ended up being a dodgy ground for the coils.