Boost Problem

[Chaos the Xile]

On my RB25, I am getting like no Boost when you get on it you hear the wastegate open up but then nothing... you have absolutly no power. I checked the lines on the solinoid, and the wastegate itself and dont see any breaks or bends in the lines, or on the solinoid itself... any help would be great!

I have a AVCR that is on stock settings. 20% Duty Cycle, 50% boost pressure. I have a GT35R turbo, so I you think It may be the settings let me know what to change them to... thatnks.

[Shocker]

whats the spring setting on the wastegate? did you accidently buy the 3 pound one?

[gawdzilla]

exhaust is probably forcing your wastegate open...

[Chaos the Xile]

no its a 5 pound spring, and it never use to run like this... running like an old woman in a wheelchair. I don't know I triple checked all of the hoes, **** its just not boosting!

[USMCgetsome]

check your bov. then check the waste gate line to the avcr and then check the intercooler piping. Also run the engine and see if the turbo is spooling.

[Chaos the Xile]

actually the screw that goes into the top of the the BOV is stripped. So I don't know if that will cause any problems????

[Joe]

actually the screw that goes into the top of the the BOV is stripped. So I don't know if that will cause any problems????

um yes

you basically have a giant hole in your intake piping now.

[Chaos the Xile]

huh... ok so I guess its new BOV time then, damn! I just recirc'd this ***** too! Well lets prey that is the problem, and all will le well after that!