boost adaptor missing?

[silviaxspress]

I was looking to connect my boost controller today... but there is like only 1 adaptor from my car to the boost controller that is comming from my glove compartment.

But the greddy controller has 2 adaptors.

You can see that the Green/White wire adaptor is ready. But there isn't a Red/Black adaptor, which is the power adaptor to the boost controller.

Any idea where that power adaptor would be placed for a boost controller? I just aquired my 240SX. Thanks!

[xekushnr]

just run the red wire to a wire with 12 volts switched power (i.e. ignition) and the black to a ground.

[Silvia2b]

yeah cut the plug off and use a fused sources for the power. Try keep your ground as short as possible.

[silviaxspress]

Thanks!!! I will try to tap into a 12volt wire if i can't get a perfect adaptor to fit it.

[msaskin]

Forget about an adapter. Just cut the end off and splice the wires as mentioned above.

Done...free

~matt