Bolts

[Caplax40]

Well, I'm piecing back the interior of my B13 SE-R project, problem is, I'm missing a couple of bolts! They're the two bolts that hold down the drivers side plastic trim and the U-shaped section that the drivers door secures into on the bottom. I hope that makes sense. I can post a picture later if need be. Do Nissan dealerships still carry these things or does anyone know offhand where I can easily get a hold of them?

Thanks!

[nametakennow]

Do you know what size they were? I'd just pick up some from wherever.

[RED_DET]

I need some pics to be exactly sure on what interior pieces you mean. I have a bucket full of sr nuts, bolts,washers etc...

[Caplax40]

Here's what I am talking about. The first picture is of the drivers side, close to the door jamb. The second picture is of the bolts themselves that are in the passenger's side. If you need a picture of the actual bolt itself (from a side angle or something, let me know and I'll unscrew the ones on the passenger side.

[RED_DET]

Let me check. Those are hex heads correct?

[Caplax40]

^^^^^^^ You are correct sir.

[RED_DET]

Unfortunately I don't have any of those. Junk yard should be a excellent start. I would think any model sentra 91-94 should work.

[Raxephon]

Let me check. Those are hex heads correct?

No, Those are TORX bolts, NOT Hex.
Modified by anlasak at 1:43 AM 4/9/2006

[Raxephon]

And just in case you decide to get new ones from the dealer.(Part Numbers in RED)

Its considered part of the 3 Point Fixed Automatic Seat Belt System,('94 Sentra FSM BF-39) & (Section 868 in the NISSAN Parts Catalog).