BOLT LOOSE! HELP!!?

ONLY for ADVANCED technical discussion about the 240sx!
User avatar
ddgrave321
Posts: 55
Joined: Sat Jun 02, 2012 9:17 pm
Car: 240sx (sr20det)
Location: Minot

Post

Yeah so I took my 240 last night for an evening stroll. just a drive to the gas station and not even using up the turbo. I then heard a clunk in my hood and heard it fall out. Pulled to the side and walked back, and what I found is a bolt (pics below) the thing was hot! I mean this thing took a good few min to cool down so I know its from my engine.

Looked under and didnt notice anything dripping.. tried hard to find where it came of the engine and the only thing i saw was the turbo was missing a bolt. Tried that place and it seems like it didnt fit..

only thing I can think of was maybe its a bolt from the transmission since it is giving me a headache with the clutch and crap..

so do any you guys know where this bolt might go? And today I notice that when i rev around 4-5k i hear like a pop under my car (not engine bay) maybe its something down there?

Image

this looks like it might have broken of. smooth surface and a couple chip makes me think this bolt broke of
Image

The word on top of the bolt reads as "A2 -- 70"
Image


Fastazz240
Posts: 189
Joined: Sun Apr 25, 2010 10:40 am
Car: 1995 Nissan 240SX
93 Nissan Vert
95 vHardbody 4X4

Post

possibly a flywheel bolt but not too sure

Greenman666
Posts: 15
Joined: Thu May 31, 2012 6:41 pm

Post

Almost looks like a sway bar mount bolt. Check those, though I don't know why it would be super hot. What size is it? The head.

User avatar
ddgrave321
Posts: 55
Joined: Sat Jun 02, 2012 9:17 pm
Car: 240sx (sr20det)
Location: Minot

Post

Thanks all for the suggestion guys. I wont get it into a lift till thursday but I def appreciate all of this. Ill make sure to check the places you guys recommended. And the Bolt head is somwhere like 1/2,12 mm

Length: its about an inch and a half. But like i said the bolt looks like the bottom was clean cut which broke of..
Last edited by ddgrave321 on Tue Jun 05, 2012 7:52 pm, edited 1 time in total.

User avatar
asoomal
Posts: 2374
Joined: Tue Feb 26, 2008 4:45 pm
Car: 2001 Subaru Impreza L 5MT (Daily)
1992 Nissan 240SX SE 5MT w/HICAS (Being restored)
Location: Canada

Post

Looks like an exhaust bolt to me, I don't think Nissan bolts have those markings on them...

User avatar
ddgrave321
Posts: 55
Joined: Sat Jun 02, 2012 9:17 pm
Car: 240sx (sr20det)
Location: Minot

Post

So i got the car on the lift and spent about an hour looking at everything and didnt find a thing.. being an exhaust bolt is the closest thing I found tho.

It def matched the exhaust bolt that was installed on the other ones. However I didnt find it anywhere that could fit and a place where it might have even came off of.

Like I said my car feels the same so IDk ..

User avatar
OutToWinPAHC
Posts: 8810
Joined: Thu May 31, 2007 12:19 pm
Car: 2015 Chevy Silverado
Nissan Skyline R33 GTS-t
Nissan Skyline R32 GTR
Nissan RB20 E46 RHD
2015 Harley Vrod Muscle
1990 Nissan Patrol
Location: PA
Contact:

Post

M12x1.25 could be anything from suspenion to motormounts, jack her up


Return to “240SX Technical Forum”