Body Kit help

[Michael_H]

I need help with my front bumper. Its a chargespeed. Everything else went on fine except the front bumper. Its 2 inchs too low, and sticks out 1 inch too far. Anyone got any advice here are some pics of it.

[KFL]

In the 3rd pic shows the bumper reinforcement..that will have to be trimmed down most likely as its too large for aftermarket bumpers.Also your missing the bumper retainer.

I have a pic of what needs to be trimmed down,retainer also have a question Shoot me a email [email protected]

[Michael_H]

Thanks for all the help, we got the front bumper on finally, We cut the support bumper and the cut an inch off the bars, moved it up 2 inches and welded it back on. Heres some pics

[Michael_H]

ITS DONE!!! I GOT IT YESTERDAY! YAY!! lol here are some pics i took with my phone i'm gonna get some better ones up later this weekend or this weekend. But I have ONE more problem we took it to get it inspected and my check engine light was on and the guy said don't bother it will fail if the check engine light is on. So he got his portable scanner thing out and gave us a code P1445. I looked it up and this is what i found. EVAP Canister Purge Volume Control Valve. Whatevers wrong its with the emssions. All I added on to that system was a Alphawerks Cat-Back exhaust and an Apexi Cold-Air intake. Anyone know what I need to do? I have till March 3rd, 10 days.

[creative]

you can disconnect your batteries over night so the light will reset before you get tested =] it should last for some time until it comes back on.