Blitz FATT DC turbo timer

[xero1]

i got a Blitz FATT DC turbo timer at a good price, but it didn't come with any installation instructions. there are 5 wires on the turbo timer box, 2 black, 1 green, 1 blue, 1 red. where do i connect these wires? the turbo timer is going in my 95 240.

[Blown240sx]

http://www.xspeed.com.au/manua...n.pdf

[drifter_for_life06]

http://www.240sx.org/links/ins...x.htm

[xero1]

i follow the wire colors and the trubo timer dosen't work. the turbo timer dosen't keep the engine running after the car has been turn off, but the turbo time keep conting down. is there something wrong with the turbo timer?FATT Ign. ColorsPurple --- Hand BrakeOrange --- Speed SensorWhite --- Shift Lock (Auto)Red --- 12 Volt WHITE/REDBlue --- Accessory BLUEGreen --- Ign. "on" RED

[Blown240sx]

Double check your wiring and also with mine I had the version II and it had a button ont eh back that was A and B settings the A didnt work so i switched it over and it worked for me. But double check all your wires and make sure you have good solid connections and good grounds.

[xero1]

i try switching the switch on the turbo timer box but it didn't do anything. are my wire colors correct? i do have a good ground.FATT Ign. ColorsPurple --- Hand BrakeOrange --- Speed SensorWhite --- Shift Lock (Auto)Red --- 12 Volt WHITE/REDBlue --- Accessory BLUEGreen --- Ign. "on" RED

[Blown240sx]

Yea they look right... You might try metering the ignition key syliniod. See if the wire being used are the ones you need. You need to have one that is tapped when the key is in the on position acc and constant. Make sure you have the right wires tapped and that there arnt any issues with those tapped wires. Are yo using the plastic taps? Because those at times dont make a great connection.

[xero1]

i solder the turbo timer wires in the ignition harness. i will take my s13 apexi turbo timer out and swap it in my s14 tomorrow to see if i have a bad blitz turbo timer.

[xero1]

i found the problem, the ign. on wire was wrong, not red, black/white. the turbo timer works ok now.FATT Ign. ColorsPurple --- Hand BrakeRed --- 12 Volt WHITE/REDBlue --- Accessory BLUEGreen --- Ign. "on" B/W