bleeder

[drag]

i have a ka sohc. how do i bleed the cooling system? thanks
Modified by drag at 4:43 PM 12/16/2004

[mss5413]

there is a bleeder hole on the intake manifold near the temp. sensor and temp. sender. It is actually a bolt, but anyway take it out and rock the car back and forth a little or just let it sit there for a while with the hole open. The air should eventually come out. By the way, what kind of problems are you having that you want to bleed the cooling system?

[navysnail]

also, while it's open, pour distiled water into the radiator untill coolant comes out the bleeder, then put it back and your set.

[drag]

i wana bleed it kos uhh, its kinda overheating. not really overheating, the temp gauge pin is always between H and C. after i test drive my car, i squeez the radiator hose a its hard. like ders pressure inside, like it wanna burst. thanks 4 replying.