blacktop sr20det fuel pump issue

ONLY for ADVANCED technical discussion about the 240sx!
circuscoupe
Posts: 4
Joined: Sat Feb 16, 2013 9:29 am
Car: 89 240sx coupe blacktop sr20det swap

Post

I have a 89 coupe with a blacktop sr20det swap the thing is the fuel pump wont feed I have power going all the way to the plug for the pump but the pump side is dead can any one tell me what this issue could be?


User avatar
WDRacing
Moderator
Posts: 15983
Joined: Mon Nov 25, 2002 2:00 am
Car: 95 240SX, 99 BMW 540i, 01 Chevy Express, 14 Ford Escape
Location: MFFO
Contact:

Post

You have power to the fuel pump plug in the trunk, but not from the plug to the pump? Sounds like the pins inside the plug are bad. Have you tried hard wiring it?

circuscoupe
Posts: 4
Joined: Sat Feb 16, 2013 9:29 am
Car: 89 240sx coupe blacktop sr20det swap

Post

Not yet the pump is a walboro 255 is there a way to get a replacement plug

circuscoupe
Posts: 4
Joined: Sat Feb 16, 2013 9:29 am
Car: 89 240sx coupe blacktop sr20det swap

Post

And yes I get power to the trunk

User avatar
WDRacing
Moderator
Posts: 15983
Joined: Mon Nov 25, 2002 2:00 am
Car: 95 240SX, 99 BMW 540i, 01 Chevy Express, 14 Ford Escape
Location: MFFO
Contact:

Post

You can get a plug from anywhere and just splice it in. I found this one on Amazon. Is it a 2 wire?

http://www.amazon.com/CES-Gauge-Quick-D ... sim_auto_4

circuscoupe
Posts: 4
Joined: Sat Feb 16, 2013 9:29 am
Car: 89 240sx coupe blacktop sr20det swap

Post

Thanks man would a hard wire work tho?

User avatar
WDRacing
Moderator
Posts: 15983
Joined: Mon Nov 25, 2002 2:00 am
Car: 95 240SX, 99 BMW 540i, 01 Chevy Express, 14 Ford Escape
Location: MFFO
Contact:

Post

The only difference between hard wiring it and having a plug is the ability to disconnect it. Cut the plug out, temp hard wire it and verify that everything works. Then buy a new plug.

compactfean
Posts: 2602
Joined: Thu Dec 03, 2009 10:28 am
Car: 89 240sx s13 sr gt3071r 23psi
B14 sentra ser sr20de-t 7psi
daily
Location: reno nv

Post

Bad ground?


Return to “240SX Technical Forum”