Black FN01R-C w/ Polished Lip Now Available from SPL PARTS!

[Nismo_Freak]

http://www.splparts.com/Parts/...t.htm

1-866-SPL-PARTEmail SPL

If you have fitment questions please post here and I will help... Kuah is flyin solo over at SPL and is pretty busy.

[n1genome]

i got two questions, for ya if you don't mind.

1) what the weight of the 17x9 (15et wheel) and 17x10 35et wheel? i hear lightweight but never a close figure.

2)on my 95 s14, with rolled fenders, can I get a away running on 17x10 35ET rear with 235/45/17" or 225/45/17 & fronts running 225/45/17 on the 15et 17x9 without much roll. (i do have HKS coilovers/z32 brakes)

thanks, for all the help and taking the time

[Dirtylou]

Those look like they're worth converting (5 lug).

[Nismo_Freak]

i got two questions, for ya if you don't mind.

1) what the weight of the 17x9 (15et wheel) and 17x10 35et wheel? i hear lightweight but never a close figure.

2)on my 95 s14, with rolled fenders, can I get a away running on 17x10 35ET rear with 235/45/17" or 225/45/17 & fronts running 225/45/17 on the 15et 17x9 without much roll. (i do have HKS coilovers/z32 brakes)

thanks, for all the help and taking the time

17x9" - 19.4 lbs17x10" - 21.3 lbs

Those fitments will have no problem... although a 225/45/17 on a 10" wheel is by no means a good fitment.

[hondah8n]

they look awesome, i might like them more if the center was black as well.

[Nismo_Freak]

they look awesome, i might like them more if the center was black as well.

Thats why they make spray paint hehe.

[hondah8n]

haha yea for spray paint!

[n1genome]

17x9" - 19.4 lbs17x10" - 21.3 lbs

Those fitments will have no problem... although a 225/45/17 on a 10" wheel is by no means a good fitment.

thanks, now just got a decide on the sizes.

[Bronze MFP]

Anyone ordered a set of these yet or have pics of them on a 240?what size/offset is that wheel in the pic above?and is is possible to get a wheel that looks like that (the spokes sloping inward toward the hub) and not have it look like the car below? the wheels look like they stick out way too faron a completly different subject, are there any s14 KTS coilovers in stock?spl is about to get a big order from me

[chmercer]

imho that car just looks wierd because its not very low and has unmodified fenders. if you want the wheel to be further inside the fender you can either 1. pull the fender out and get them in +25 or +12 2. order the 17x10s in +35 offset. 3. run grip camber settings, 2 or 3ish. 4 lower your car

[Bronze MFP]

yeah, those wheels on that car, plus the tijuana stretched tires look bad, imoI think i found some good sizes even though the rear fender may still need to be rolled (17x8 +25 front, 235/45/17 tire === 17x9, +15 rear 255/40/17 tires)

[chmercer]

you probably wont have to much work with the fenders on rear sizes like that. i had 10 +25s with 255s and had no trouble, i was going to space it out 20mm but i sold the wheels. i guess you are more of a fan of the traditional muscle car look?

[Bronze MFP]

why do you say that? because of the tires? the stretched look never grew on me, the bead looks like its about to give way and blow the tire off. at any rate, i don't care for it. And yeah, I do like muscle cars

[Nismo_Freak]

why do you say that? because of the tires? the stretched look never grew on me, the bead looks like its about to give way and blow the tire off. at any rate, i don't care for it. And yeah, I do like muscle cars

Your S14 looks hot.

[Bronze MFP]

[QUOTE=Nismo_Freak]

Your S14 looks hot.

[/QUOTE

well thanks i'm hoping it will look hotter with some black/polished FN's and dropped a little more on KTS coilovers. I'm digging your s14 too... it's got all the other parts I want oh and the paint isnt faded to pink on the front either