Best way to remove engine wire harness?

[darklitch]

I'm putting a rb engine in my 95 S14. It's equipped with a/c so under the passenger side dash its rather tight. Do I have to remove the entire dash and a/c unit just to remove and install the new harness, or is there some special trick? I've searched google with a few different phrases and nothing came up about this subject. I am really hoping I don't have to remove the dash as that will take hours.

ThanksJack

[MR.chris]

The only thing you need to remove is the ABS if your S14 has it. Its pretty easy to do. You might want to use a coat hanger or something to pull the wiring harness through the firewall and behind the dash.

[Wretched]

just loosen a few of the nuts holding the evap core and blower box. this should give you enough room to wiggle everything through. there is also a small clip holding the harness to the firewall...either pull real hard or get a screwdriver back there and pop it loose.

[newone]

I am new here and have a question since this is a topic I am interested in. Is it very difficult to find a wiring harness for the engine and interior? Do you know how much work is involved in putting these in the car? Thank you.