BEST SEAT RAILS

[wirelessalpha]

Preface: I searched this 3 forums (240sx, 240sx tech, and 240sx Vert and didn't come up with any relevant answers)

Ok, so some of you might know, I am looking to purchase some seats. Here's my questions:

1. Anyone here have a set of the Buddy Club WIDE version?2. In general, anyone use any of the following rails (all are listed as low position rails...good for 240's)

a. Vision Super Low Position Seat Rails (http://www.technicasport.co.jp/eng/seat.htm)

b. MemoryFab Rails (http://www.memoryfab.com/detail_accesso ... t.php?id=3)

c. Bride FG Rails (http://www.240sxmotoring.com/brbafor24fg.html)

So, any of you guys use the above? OR do anyone of you know of other manufacturers that make low seating rails? If so, let me know. Plus, it would be a good thread!

[top_secret]

rails are really easy to make from angle iron at lowes....I made my own and got my seat to sit just how I wanted it.

[wirelessalpha]

Yeah, I had to do the same with my old seats I had in a del sol, I just didn't want to go thru it again. It's not difficult...but a bit of a hassle.

BTW: Nagisa Super Low Seat Rail is another brand that is available (but I hear they won't work on wide seats).

http://cgi.ebay.com/ebaymotors...22062

[top_secret]

the problem with the 240 is the hump on the floor, it prevents you from getting seats as low as you might like.. I think mckinney motorsports just cut it out but thats a lot of work.

[madcowvert]

i'm not sayin that your work is no good but how storng do you think the rails made with iorn from lowes is?

[top_secret]

10 times stronger than stock, easily... the stock ones are stamped steel, and pretty thin steel at that. mine are 1/4 angle iron.

[wirelessalpha]

Bump, and I'm adding another to this list:

Driftworks Super low side mount

http://www.driftworks.com/cata...-side

[BomexS13]

Bride FG OR Nagisa rails should be fine..

[wirelessalpha]

bump for the heck of it

[wirelessalpha]

and taking a cue from a fellow nico member

bump bump bump!