b14 sr20ve wont start after swap help please !!

A great resource for Nissan Sentra, Infiniti G20, 200sx, Pulsar, NX1600, NX2000, Tsuru, Primera and Sunny owners.
sr20atheart
Posts: 1
Joined: Thu Aug 20, 2015 7:52 pm
Car: 96 200sx SE-R

Post

I have a 96 se-R i swapped out the de engine for a ve. car wont start i turn the key its dead as if the battery was dead but even giving it boost nothing.Im thinking its a ground issue but i think i got it all plugged up now i have notice plenty plugs were left unplugged i had no slots for them is that normal? also i noticed on most nissans the positive battery terminal had to wires clipped in this one only has one that makes me feel like im missing the other one i know with nissan if the wire comes out it automatically turns off


SoundEfx
Posts: 263
Joined: Thu Oct 16, 2014 3:54 pm

Post

If you did a swap and there are wires unplugged, then they might be vital in the engine starting and also running if you get it started.
I would get the right harness for the engine before going further.

Typically you get the engine, harness and ecu.


Return to “Sentra Forum / Infiniti G20 Forum / Pulsar / NX Forum”