b13 gauge cluster

[nacho_nissan]

well i have a 91 sentra with no tach. I want to upgrade it to a cluster that has a tach. But the 1 i can get is for auto transmision,and mine is manual. Will it fit my car even if from the same year and different trans? Where do i plug those wires for the tach? Please help!:help

[NISTECH]

your harness could be prewired just plug in the available connectors in the back and fire it up. be sure you match designs before you buy anything. the sentra around that time was made in three different places. mexico, usa, and japan. they used different suppliers so there are suttle differences between the 3 different plants. best way to do it is to match the first digit of your vin to the car your getting the part from. 1 is usa, 3 is mexico, and J is japan.

[azkicker0027]

so the rest of the connectors are taped back to the harness, as in the car is prewired for 100% options, intriguing.

[NISTECH]

its cheaper for the manufacturer to make one harness instead of several for the many different options they offer.

[azkicker0027]

i noticed that on my rear parcel shelf, when i took it out, the was a connector for the high mount stop light, eventhough i had the led spoiler wing from the factory.

[FrontierMan63]

Does Any1 Know where i can get a Cluster 4 a 92 B13 SE-R?

[nametakennow]

Junkyard.