automatic drive positioner

[usday]

Hi all,I wanted to check if there were any codes on the ecm, so I followed the steps from one of the threads, thank god no problems. But ever since I put every thing back the automatic drive positioner won't work. I looked in the archives and tried starting the car and setting memory, but that didn't help either. Memory sets fine but the seat moving back and the steering jumping up when getting out was very nice. Appreciate all the help. Thanks.

1994 q45. 150k miles and central illinois

[911/Q45]

Check the cancel switch on the steering column.

[usday]

Thanks but did that and the cancel switch is in the off position or the right position where adp should be working. Anything else I should look at.

[usday]

Hi all, Was just looking at the infinity site and they said something about resetting the LAN for the automatic drive positioner. Any ideas how to do it. Thanks

[maxnix]

1. Open the drivers side door2. Turn the key to the run position 3. Turn it all the way back, but don't remove it4. Close the door 6. Wait about 1 minute7. Open the door again, the seat should move

Waiting for a full one minute is the key.

[usday]

Thanks for the help, worked great.