auto to manual swap

ONLY for ADVANCED technical discussion about the 240sx!
S14 Stud
Posts: 56
Joined: Fri Jul 26, 2002 2:40 pm

auto to manual swap

Postby S14 Stud » Mon Jul 29, 2002 3:15 pm

ok I am thinking about getting an automatic 240 since those things are so much easier to find around here and making it into a how hard would that be. I have another 240 (wrecked) with a 5 speed and everything, so can I just use the parts from my 240 and swap a manual instead of auto? or would I have to get additional parts?

Posts: 4001
Joined: Sun May 12, 2002 7:20 am

Postby Daunttless » Mon Jul 29, 2002 3:15 pm

All your parts will swap, if you have the complete engine that'd probably be the easiest, You'll have to swap everything down to the the pedals. : ) The wholes are already cut, just unbolt everything from your manual, and bolt it in to the automatic. You'll need some console pieces and such as well. : ) Good Luck!

User avatar
Posts: 94
Joined: Sat Nov 01, 2003 8:59 pm
Car: 1998 240sx

Postby s14db » Mon Jul 29, 2002 3:15 pm

It's not that hard. there are several posts on it. use the search fucntion.Also check out :

Posts: 12270
Joined: Sun May 25, 2003 4:17 am

Postby NISTECH » Mon Jul 29, 2002 3:15 pm

oooooooook........... but the post was made when the site was fairly new since the last past in this thread was made in july of 2002


Return to “240SX Technical Forum”