auto manual swap

[UnderPressure]

okay if i get a transmission and ECU what else do i need to do the swap? what do i do? does it just bolt in?i know i need apedal and clutch master cylinder and line, what else?

thanksChris(AND WHATS WITH THE LACK OF MANUAL 240 S13s IN ATL?)

[b240]

There was a really good HOW-TO in the tech section awhile back and i also posted one on shift240.com tech section.

[UnderPressure]

thanks ill go look. . . .

[MainEvent212]

hey, where in ATL do you live? and what school do you go to?

i was at GA tech thursday and friday...

[Aries]

emil me if you need a tuned 5 speed ECU for a DE

[UnderPressure]

im live in gwinnett during the summers. right now im in statesboro for school- geaorgia southern. Aries, i may need it- not sure yet tho. ill let you know

Does anyone know of a good shop in Atl that can take care of this swap for me? (Other than balanced perf- they cost too much $) I would do it but i need it done quickly and professionally bc i need the car for work almost right after i buy it. i maybe could have it down for a 2 days at most for the swap. thank you~Chris

EDIT: think in gonna go with unstable hybrids. the guys sound well educated and friendly. Anyways, i need a parts list if anyone has one. . . Please? thanks guys~Chris

[Rockenreno]

I also may be looking at doing an auto manual swap (found a promising car here in san diego, but its auto:mad: ). Anyone know of good shops/price around here? I doubt that I could do the swap myself since I have zero experience under the hood

[UnderPressure]

ya, parts list anyone? this is what ihave so far. . . trannydriveshaftecuclutch linesmaster and slave cylindersbrake and clutch pedal assemblies.and crank pulleymissing anything? im sure i am. just help me out some

[[DTH]240sx]

yea, i lookd for months for a manual s13 in my area. didnt find one, so now im doing the manual swap as well, let me know how it goes

[UnderPressure]

will do, but still looking for a parts list. . .

[Rockenreno]

http://www.zilvia.net/f/showth...21181

try that link, has what you need to do a swap...

anyone know of any shops around san diego that do good transmission swaps and how much they charge?

[UnderPressure]

thank you soooo much

[twlnbro69]

Rockenreno I am in the process of finding a place to do my swap. Still getting quotes tho. Ill let you know as soon as i get a price.So far everywhere Ive been to has only done hondas and eclipse. And they advrage 2000-3000 for those. I dont think it will cost that mutch becouse I dont have to replace as much

[Rockenreno]

cool, thanks good luck with your swap!

[574-240sx]

I did an auto to manual swap on an S13UnderPressure this is what you are missing:crossmemberPlate that goes in between the transmission and the and engineThe little box that goes before the clutch lenes goes into the slave.You also need the transmission wiring harnewss if you want reverse lights

This is what you don't need:ecubrake petal assymbly, just cut the auto petal down to size and place the rubber foot piece over it.crank pulley

[Just another 240]

an engine from an auto 240 is the same for a stick 240 right?i have an engine from an auto 240 that i want to put in my car because the engine from my car have 178,xxx miles.

[UnderPressure]

actually someone told me that i do need the pulley because it has slightly different harmonics and will damage if not totally kill the engine over time. . . . pretty reliable source too.but anyways, thank you for the help

[GrEy240SX]

doesn't it cost like 1000 to get an auto->manual swap? I'm thinkin bout get that done sometime.

[574-240sx]

if you supply all the parts, i'm willing do the auto to manual swap in my garage at my house for $500. The swap would take a day. I'm located in Indiana. Nick

[nametakennow]

(AND WHATS WITH THE LACK OF MANUAL 240 S13s IN ATL?)

I think every non-enthusiast 240 owner here (ATL) is just lame... same problem with S14s.