Attn: Superskunk

[Promise Land]

To fit your 20" wheels, did you initially lower your car or leave it stock height? I have some 20" QX56 wheels on a 3-D model I am tinkering with at work and it looks like it will possibly rub with the 2" lowering job I put on the car. Maybe 1.5" is the max I can lower it without touching the fenders.

[superskunk]

well first off if your gonna test fit QX56 rims keep in mind that the lug patterns are different... i have tanabe springs which give a 1.5 drop in the front and 1.4 in the rear, but it all depends on the size of your tires... i have 225/30/20... i think with 2 inch drop on those rims im guessing the tire size to be about 235/60/20 it wont work... your going to need smaller tires... but besides that the offset might be all screwy.... but let me know what your findings are...

[Promise Land]

well first off if your gonna test fit QX56 rims keep in mind that the lug patterns are different...

Yes, the QX56 lug pattern is a 6-bolt vs. the Versa's 4-bolt. But since this is on my PC at work I can move the QX wheels in place of the Versa's 15" to see what it looks like. I don't have the availability to replace tires to test fit a 20" tire other than the QX tires which are too large for the Versa. But it looks good anyway in the PC model.