Attn SE VA people

General discussion forum about the 240sx, and a great place to introduce yourself to the board!
[Zero-S]
Posts: 5295
Joined: Wed Apr 16, 2003 10:56 am
Car: Tell me whats wrong with this picture. 3 240's, only one runs.

Post

I need a good (cheap!!) body shop to pop out a dent in my quarter panel. Doesn't have to be painted or anything, just needs to be popped out/bondoed/possibly primered.

Anyone know?

edit: Around Newport News/Hampton would be nice.


User avatar
Hijacker
Posts: 14373
Joined: Wed Aug 13, 2003 4:57 am
Car: '92 240sx Convertible
'94 F-150
Location: Fredericksburg, VA

Post

if at all possible, i would avoid using body filler on it. see if they can pop it out before resolving to body filler. depending on the location, they should be able to get behind it in the hatch area and pop it out that way.

[Zero-S]
Posts: 5295
Joined: Wed Apr 16, 2003 10:56 am
Car: Tell me whats wrong with this picture. 3 240's, only one runs.

Post

Its right next to the door, Bart. It's bad enough to where the door doesn't open (going to have to replace the door as well, which won't be too hard seeing as I have a few lying around).

The ding is pissing me off tho, I'm running the wires from my 93 in it, and I can't get to the passengers side stuff because OH **** my door doesn't open...

But if they can get it out w/o using bondo, more power to them.

[Zero-S]
Posts: 5295
Joined: Wed Apr 16, 2003 10:56 am
Car: Tell me whats wrong with this picture. 3 240's, only one runs.

Post

bump?


Return to “240sx General Discussion”