i just wanna double check with you guys with my emanage.

Parameter setting:NS_HW-7 airflow meter270cc / 370cc = 0.730rotary sw1 = 2rotary sw2 = 0rotary sw6 = 6

ignition input jumper setting = pull downignition output jumper setting 5v

A.A.V value:0



when i open up my fuel map its tps vs rpm

tps scale starts at 2.00, 2.20, 2.40, 2.60 by .20 up to 5.0

same with ignition maptps scale starts at 2.00, 2.20, 2.40, 2.60 by .20 up to 5.0

let me know if you guys see anything wrong here.

i said it in the other post too, ur missing the injector ground.

The injector ground, which as I said in the other post too, is located directly under the # 4 injector, and is a B/R wire.

done and done. thankyou!

Which ecu pin number does the injector ground tap into on an S13?