Attention lip whores... XENON never went away...

[adrianfromthecastle]

question: how did you guys get that double sided tape to stick on the lip? the tape wont stick to the urethane..!

[koukicody]

did you use the good 3M brand tape??i would think that would work

[ArticDragon192]

I used good 3M tape. It still comes off though so I might just scrap the tape.

[BaliLover]

Did you follow the mounting instructions about scuffing the lip with 80 grit sand paper and cleaning it to remove the stuff the mold left?

[adrianfromthecastle]

Did you follow the mounting instructions about scuffing the lip with 80 grit sand paper and cleaning it to remove the stuff the mold left?

i got pwnd by instructions

[Tripz]

I didn't follow the instructions as well haha. I only used 3M tape on the sides only and screwed in until it was stable.

[yelnatsch517]

i feel like i still would somehow find a way to still destroy it, urethane or not ive gone through 2 piggy snouts. driveways arent my forte

oh its urathane!? cool!but not undestructable when u drive ur car hard. hehe most driveways are not b.kit n lip lowerd cars friendly, okay then , BUT 300 still way pricey. i say 230 for urathane lip would be decent.

Some urethane pieces really are practically indestructable at least from what I heard. Stillen kits for example can be wrapped around a light pole and it'll bend right back into shape over night. At least from what I heard.

[ArticDragon192]

Did you follow the mounting instructions about scuffing the lip with 80 grit sand paper and cleaning it to remove the stuff the mold left?

Yes, but when you're running as low as me, the lip scrapes everywhere and tucks the fender with it too casuing the tape to unstick. So yeah, I'm ditching the same lol. Might add a screw on each side of the lwoer tabs where it mounts to the bumper under the vents for better fitment. tape ain't holding up.

[s13jus10]

hey, where is the place I can get 3M tape the cheapest?

[ceefromdasco]

hey, where is the place I can get 3M tape the cheapest?

how expensive can it be? just go to your local auto parts or hardware store and buy or just steal a $3 or $4 roll.

[s13jus10]

really? because i'm looking on ebay and I guess they only sell it by the bulk (36 yards) for like $35 lol haha . ok thanks

[babowc]

anyone know what the second batch is???defienitely got money for the second round...

[nwmrkt]

anyone know what the second batch is???defienitely got money for the second round...

Just call in and see whats up

[ArticDragon192]

FYI, the lip comes with 6ft of tape.

[Drift n show]

250 bucks!!! you mind as well just go to ebay, or buy a new bumper when you mess up the old on. seriously dude, ill make my own damn lip kit!! its not really that hard, a friend of mine did it and it looks hot and nothin like a ricer. He go all the parts from the amazing HOME DEPOT.

[adrianfromthecastle]

250 bucks!!! you mind as well just go to ebay, or buy a new bumper when you mess up the old on. seriously dude, ill make my own damn lip kit!! its not really that hard, a friend of mine did it and it looks hot and nothin like a ricer. He go all the parts from the amazing HOME DEPOT.

good looking lip > wall trim from your bathroomyou fail

[koukicody]

good looking lip > wall trim from your bathroomyou fail

[Acedem]

Does any body have pics of the lip when they got it, not intstalled??Also did everybody who bought the lip had chuki's? No ZENKI buyers or pics??
Modified by Acedem at 9:34 AM 10/12/2006

[ArticDragon192]

250 bucks!!! you mind as well just go to ebay, or buy a new bumper when you mess up the old on. seriously dude, ill make my own damn lip kit!! its not really that hard, a friend of mine did it and it looks hot and nothin like a ricer. He go all the parts from the amazing HOME DEPOT.

Where's the negative rep when you need it dammit. Home depot equals ghetto stuff and that doesn't fly. I bet you run rotas and Megans becuase they were cheap, hahaha. Right from the getgo, people knew this lip wasn't gonna be cheap, but hey, you gotta pay to play, and this lip owns pretty much any add on lip out there in the market. It looks good, is nearly indestructable, and for the price and what you're getting, it's unbeatable.

[94_240sx]

Someone actually went to Home Depot and checked out wall trim that people use to fabricate lip? I was curious, so I did when I went to Home Depot one day. I think material is VERY similar to Xenon lip. Yeah, but if you have a factory lip in good shape, you are better off with Xenon lip. Good looking, nice fitment and most of all durable. If you lower your S13, you know what's going to happen to your front bumper. I have a fresh paint on my bumper and am happy with Xenon lip...

[babowc]

wait..you need the factory lip on the chuki to mount this lip???i was not aware of this..shouldnt be.. i cant see why you;d need the factory lip??

[penpen-commander]

who said that?no, no you don't need the factory lip.

[babowc]

Someone actually went to Home Depot and checked out wall trim that people use to fabricate lip? I was curious, so I did when I went to Home Depot one day. I think material is VERY similar to Xenon lip. Yeah, but if you have a factory lip in good shape, you are better off with Xenon lip. Good looking, nice fitment and most of all durable. If you lower your S13, you know what's going to happen to your front bumper. I have a fresh paint on my bumper and am happy with Xenon lip...

by reading that, i thought you needed the factory part.guess not.

[babowc]

is this still runninnnggG???i misseed the first round

[94_240sx]

is this still runninnnggG???i misseed the first round

I guess you just have to call Russ andsee if he still can do it.

[Driftless240]

I am going to get this next batch. You gotta pay to play and quality costs. I am willing to pay that much for a great quality product.

[~4N~]

Does the lip come pre-drilled?

If any of you guys decide to sell yours, let me know!

[penpen-commander]

no, and no.good luck.

[ArticDragon192]

^+1 Hahaha

[1993240]

Hey guys are there any more lips being made? Another group buy? Come on, I gotsta have one!! Is anyone willing to sell one?