Are these bolt on coilovers

[D21_josh]

Thinking about picking up a g50 q45 to drive while I build my hardbody since the engine threw a rod. I've been reading about the z32 suspension swap and while looking around I found these on enjuku racing http://www.enjukuracing.com/products/Ks ... %2796.html the description is just a generic one and doesn't really say much. Are these bolt on or would I still have to do some modding?

[marcyprojects]

top of z32 suspension bolts up but you will need to bore out the large bolt at the bottom of the strut. z32 strut is about 1/4 too small. May want to look at another route considering how much coilovers cost.

[D21_josh]

So the coilovers I posted in the link that are listed for 90-96 q45 still need to be modified to work?

[marcyprojects]

those should work. I meant, dont use anything z32 cuz that bolt wont fit.

[D21_josh]

Sweet getting a q45 for a daily seems like a better idea everyday. I was thinking either z31 or q45. But I think a q45 is a way better deal per dollar.

[mattd1979]

If the q45 is a 90-93 then the lower pin that the lower part of the strut slides over is a smaller diameter than the 94-96 years so you shouldn't have any problem there with the Z32 suspension other than height and weight rating differences. I thought that they updated the pin on the 94-96 Z32 to the larger size also?

[marcyprojects]

If the q45 is a 90-93 then the lower pin that the lower part of the strut slides over is a smaller diameter than the 94-96 years so you shouldn't have any problem there with the Z32 suspension other than height and weight rating differences. I thought that they updated the pin on the 94-96 Z32 to the larger size also?

I have a set of Z32 fronts at home. Bottom bolt def would not bolt up to my 93, not even close.

[mattd1979]

So what you are saying is that the pin on your 93 is larger then the hole in the bottom of the Z32 strut?