are there skyline r32 front end conversion??

[qqNISMO240pp]

i was wondering if there was any skyline front end conversion kits for a s13 at all??
Modified by qqNISMO240pp at 10:03 PM 11/25/2008

[sebazztard]

"kits"...must been a honda owner

[qqNISMO240pp]

nope not at all chief. only had nissan

[sebazztard]

then get a skyline if you want a skyline front. there is not a skyline kit, you buy the panels and fabricate them on and have yourself a rediculous looking car which nothing flows. search, its lamely brought up once a week. its not like you have any intentions of going through with this but i have to say it anyway...dont.

[SullivanRacing06]

then get a skyline if you want a skyline front. there is not a skyline kit, you buy the panels and fabricate them on and have yourself a rediculous looking car which nothing flows. search, its lamely brought up once a week. its not like you have any intentions of going through with this but i have to say it anyway...dont.

hahahahaha, yea a honda owner is rite, buy a r32 front clip w/o or w the motor, and make sure they send it w the body panels cut the rad support off it n weld it to your car, then fab extended mounts for the front bumper n head lights

actually nm forgot were talkin to a honda driver

[silentracer]

yes i have one and love it. go to http://www.raceonusa.com and look for the Type-171 R32 Conversion Wide Body Fenders (front) for the Nissan 240SX 89-94 2/3-Door. raceonusa has it all the hood the fenders you name it

[Pirate_Freder]

Don't worry what the haters say man, if you like it then go for it. Now I do despise rice but that's a whole nother story.

In terms of doing the conversion, the only problem is that raceonusa only sells(to my knowledge) modded fenders, everything else is oem for the r32 chassis. so like "SullivanRacing06" said you need to swap out the radiator core support and you might have to make some custom brackets too. s13 core support might work but it's not meant to have the headlight or bumper brackets bolted to it so it probably wouldn't work to well if at all.

[silentracer]

raceonusa has it all except the lights and you can use the s13 core support but you need to make brackets. i got it all for $1000 that is including the price of the lights not bad so go for it. o and they have large selection of hoods and bumpers for the r32 skyline gts or gtr to choose from

[g love]

Also check out http://www.aerokits.net, they have a bunch of stuff for an r32 conversion.

[ANVIL]

raceonusa has it all except the lights and you can use the s13 core support but you need to make brackets. i got it all for $1000 that is including the price of the lights not bad so go for it. o and they have large selection of hoods and bumpers for the r32 skyline gts or gtr to choose from

post up some pics of your conversion

[silentracer]

ok i will after my finals are dun and i have time of from work man

[SullivanRacing06]

type in r32 s13 conversion in ebay, a company sells a conversion for 599.99 buy it now, the fenders r made to bolt up to the factory fenders bolt holes, ud have to fab up brackets for the headlights, u can buy a set of r32 headlights and corner markers for 125 shipped from jhot in ga, good luck