I want to put solid bushings in the J30 track car. I saw on a different forum that S13-15, Z32 J30 and Q45 all use the same bushings. Can anyone here confirm that?

they are. i am going to sometime get the energy suspension polyurethane subframe and diff bushings.

http://www.summitracing.com/parts/ENS-7-1108R

http://www.summitracing.com/parts/ENS-7-4102R/

^^^ for poly

http://www.splprosuspension.com/SPL_SSB_Z32.html

http://www.splprosuspension.com/SPL_SDB_S14.html

^^^ for solid


thats what id chose

Are you running a stock ECU? I did not think these cars were OBDII, what software do you have running in that video? Also, did you get front camber adjustment when you went to the Z31 suspension?

Jnaught, care to compare some notes as we are both successful J30 Crap Can racers?

right now i have a chipped ECU from Ash. still havent gotten the tuned chip yet to see how much power it produces. my 94 is obd1 so i got a cable and program from one guy off these forums a while back. its like a version of conzult. ive used it to hook up to my friends 300zx with success.

when i had z31 suspension i did not have camber adjustment. i found through driftday that the evo 8 camber plates fit and ran with a set of tein's to put on my uhhhh....frankenstein suspension setup. you might be able to find a way to mount the camber plates to the J30 struts. i never tried it.



-EVO VIII Camber Plates
-S13 Coilovers
-S14 Spindles
-S14 Bolts/Nuts
-S14 Tie Rod Endlinks
-S14 LCA Ball Joints
-J30 LCA

J30tChumpCar wrote:Jnaught, care to compare some notes as we are both successful J30 Crap Can racers?

Ping me @ [email protected]

Are those J30 arms?

-EVO VIII Camber Plates
-S13 Coilovers
-S14 Spindles
-S14 Bolts/Nuts
-S14 Tie Rod Endlinks
-S14 LCA Ball Joints
-J30 LCA[/quote]

i have 300zx subframe collars and s13 adjustable rucas. i got a set of 240sx stainless steel brake lines i will install soon as well and run some motul 600. s13 apexi coilovers in the rear as well.

Hey there Josh. It was sure fun putting those bushings in without waking the neighbors. Lol
Latez.
-Dave

haha yah got the energy suspension poly diff bushing for the 300zx put in as well. next is s14/300zx front lower control arm bushings.

Zombie thread from the dead! Yes I can read, it seems all choices are good ones but 240sx poly kit part numbers change from year to year.

Swimshark:
What poly kit should I get to do the entire car? s13? s14? z32?
What rack bushings are the same?


We are still road racing the J30, doing well, but its time for bushings, a year of VH45(about 80 hours on track) is really pounding the entire (stock) rear suspension.

swimshark wrote:haha yah got the energy suspension poly diff bushing for the 300zx put in as well. next is s14/300zx front lower control arm bushings.

Hi Swimshark,

Can you confirm if the Nissan 300zx rear subframe (Energy Suspension bushings) will fit my 94 J30 and if not can you recommend the ones that will aside from having to go OEM. You mentioned using them in an earlier post is the reason I ask.

Any help you can provide would be greatly appreciated. Thank you

Boding