apexi afc neo

[RBKIDD]

does this get wired in according to the directions in the booklet for a RB20DET IN THE skyline or is it different for an s13.if so please show me the link.thx again for the help.btw i have a 20 ina s13

[Yellow4g63]

does this get wired in according to the directions in the booklet for a RB20DET IN THE skyline or is it different for an s13.if so please show me the link.thx again for the help.btw i have a 20 ina s13

get a laptop and a motes burner. Then buy a wideband O2 or take it to a dyno and tune the factory ECU so you don't melt a piston.

[Kansei240sx]

get a laptop and a motes burner. Then buy a wideband O2 or take it to a dyno and tune the factory ECU so you don't melt a piston.

Listen to this man.

[Coolwhip]

wire it in the same way as a skyline

[RBKIDD]

thx for a straight answer

[RBKIDD]

i googled motes burner didnt really see ne good info.where do you find that?

[Yellow4g63]

http://www.moates.net/product_...id=48

Spelling error on my part.

[fast_s14]

here you go http://www.moates.net/product_...id=48

[fast_s14]

oops beat me to it. took me a minute to find it in my favorites

[Carl H]

I've already modded the ecu but there is something wrong with the setup because the car does not run right at all...we're trying to fix the problem.

[RBKIDD]

IM thinkin about tryin a stock ecu in there for a 20 and tunin in a z32 maf and adjustin the fuel wit the afc

[RBKIDD]

thx for the help!!

[autocrossing]

I had to set my in/out to 4/8. No melted pistons yet.

[RBKIDD]

so you have the neo wit a stock ecu and your able to tune it well.wut size injectors do you have?i have 525cc and 272 cams with the z32 maf.

[Coolwhip]

rom tune it, forget the neo for all that.

[RBKIDD]

hey on rawbrokage that rb20 pwr steering bracket is that still available?there wasnt a add to cart option by it

[Coolwhip]

hey on rawbrokage that rb20 pwr steering bracket is that still available?there wasnt a add to cart option by it

out of stock

[Carl H]

but blackbox has one :p

[RBKIDD]

hey man you have a bracket with the tensioner on it?

[Carl H]

yeah, i keep tripping over it in the garage.you just need the bracket right?

[RBKIDD]

yea as long as the bracket comes with the bolt to loosen and tighten the belt