Hey Paul,Paul Wall wrote:Hey Kimrober I have been meaning to get in contact with you bit you don't list your email address.
Can you get me any JDM parts?
Email me with the one in my profile.
For the little bulb, there's connector socket behind the housing (JDM only), but our USDM lights don't have the extra wiring that can be plugged in. So I didn't bother hooking them up.Low beam uses the same bulb as USDM models. I use HID conversion kit (Philips 6500K, Non Bi-Xenon) and it was bright enough for me so that high beam was not needed to be turned on.High beam on JDM headlamp uses different sized socket so if you still want to hook them up, you might have to cut some wire or something (which I wouldn't bother if it was for me).VIP Q45t wrote:Is the city lights (small bulb in headlamp) plug and play?Does it use the same size bulbs as the USDM ones?
Sorry, noVIP Q45t wrote:hows about $350 shipped for the modified set?
I wired mine to my parking lights since that is how they are supposed to be wired.And then ran the ground to the chassi right behind the headlights.kimrober wrote:
For the little bulb, there's connector socket behind the housing (JDM only), but our USDM lights don't have the extra wiring that can be plugged in. So I didn't bother hooking them up.Low beam uses the same bulb as USDM models. I use HID conversion kit (Philips 6500K, Non Bi-Xenon) and it was bright enough for me so that high beam was not needed to be turned on.High beam on JDM headlamp uses different sized socket so if you still want to hook them up, you might have to cut some wire or something (which I wouldn't bother if it was for me).
Look at my signature above for how it looks with HID. The photo was taken when I had installed above mentioned modded headlamps on my Q.
Wow... is that how they're supposed to be wired? What's the effect of the little bulb on normal beam?Thanks for the great tip!!Damicci wrote:
I wired mine to my parking lights since that is how they are supposed to be wired.And then ran the ground to the chassi right behind the headlights.
Yup, I have one on my car now and have another set for backup. It looks just like the ones on first post.We should meet up and kick back sometime later, I haven't seen your completed President but I'm sure it's in great shape. You da man bro!mista808 wrote:holy crap, youre in honolulu? did not even notice that till now.... i might be able to find someone locally (here in honolulu) to pick these up... i wouldve picked these up with the quickness had i not did the president conversion.... ill ask my friend and get back to you....
do you have picks of the jdm stock ones? are those crystal clear too? thanks
That's what I did on mine. I put the Putco brand 360* LED's in there. Looks almost like "HID look" headlight bulbs when I have the parking lights on.Damicci wrote:I wired mine to my parking lights since that is how they are supposed to be wired.And then ran the ground to the chassi right behind the headlights.
There's not really any effects on the low beam, but you can see my LED's when low beams are on because I have 4500K Hi/Lo bulbs.kimrober wrote:Wow... is that how they're supposed to be wired? What's the effect of the little bulb on normal beam?Thanks for the great tip!!
Thanks!dzznuts671 wrote:those lights look hella clean!! glws!!