anyone using twin walboro's... please help..

[luv2spedup]

like the title say's i need some help... i already have a walboro installed but, it's starving the motor for fuel up top at around 18pounds of boost. i have an aem ems and it's fuel maps are maxed out so is there a way to have two walboro's in therehere is a list of my modscp pistonscrower rodssc 60-1 turbogreedy intake manifoldhks 264 cams thanks

[nismofly]

wtf turbo are you running?

iirc one walbro is good for near 500 rwhp

either youre running some monster turbo to be making that at 18 psi or something else is wrong

[nismofly]

ah ninja edit with a mod list...60-1 wont max out a walbro at 18 psi, hell i dont think it even could max it out

id say youve got to look somewhere else besides the pump for the fuel problem

[luv2spedup]

walboro's are good for 500hp... that's what i thought...i don't know what else can it be, every thing checks out, could it be that the pump is not delivering a 100%, if there is such a thing

[CoupedUp]

Of course there is such thing. Stock pumps go bad right.....

[doridori23]

You could have your filter clogged or you could be maxing the duty cycle of the injectors. What injectors are you running?

[luv2spedup]

880cc injectors... i'll check on the fuel filter

[DrifterProdigy85]

Are your fuel pumps hardwired? If not there loosing voltage at high rpm resulting in you leaning out badly.

[luv2spedup]

sorry i guess failed to explain my problem, my fault. i wanted to know how to install two walboro's in my tank. but i figured out the problem i have wrong kind off injectors, we need to have high impedence injectors and i have low impedence injectors..... thanks for all the replys guys

[CoupedUp]

You can wire in resistor packs and be fine.

[luv2spedup]

just ordered one this morning