Anyone Interested in RB20 HeadGaskets?

[WRX to RB25DET]

Musicsurfman and I Have a guy that can make these Headgaskets. They Will be Copper and 1.2mm thick for lower compression and better strength only draw back is they will need to be Heated before you install them in your oven and then installed. this may also work but we will have to test it first: instaling them driving around lightly then tighting the bolts again, instead of the Oven. The price will reflect you having to put this work into them and will be priced MUCH cheaper than anyone else using high quality copper.

Tell me what you would pay for a HIGH Quality Headgasket made of Copper in 1.2 mm?

[PROJECTRB240SX]

HEY JON IF THAT GUY WANTS TO SPOT ME A GASKET I'LL TEST IT MYSELF. THE CAR IS ALMOST RUNNING JUST NEED IC PIPING AND PS LINES.

[wcbjr]

Heated in your oven? What's all that about?

Again, no more than $250 for the gasket and sealant.

[PROJECTRB240SX]

COPPER NEEDS TO SET. WHEN COPPER SHEETS ARE MADE THEY ARE INFLATED BASICALLY AND TO GET A CONSTANT EVEN WIDTH YOU NEED TO HEAT THEM BETWEEN TWO PIECES OF METAL OR OTHER HEAVY MATERIAL TO PRESS THEM INTO A ITS FINAL WIDTH.

[wcbjr]

Paeco does not have that heating step in its instructions.

[PROJECTRB240SX]

THEY USE PRE TREATED METAL.

[wcbjr]

Ahh. I have no clue about head gasket materials.

[PROJECTRB240SX]

THEY USE ALL KINDS OF STUFF. JON IS JUST TRYING TO HELP YOU GUYS SAVE MONEY, BUT YOU HAVE TO DO SOME WORK. I HAVE A RB25 HEAD GASKET TO THAT I CAN TAKE TO HIM TO GET THAT DONE UP FOR YOU GUYS IF YOU'D LIKE.

[WRX to RB25DET]

COPPER NEEDS TO SET. WHEN COPPER SHEETS ARE MADE THEY ARE INFLATED BASICALLY AND TO GET A CONSTANT EVEN WIDTH YOU NEED TO HEAT THEM BETWEEN TWO PIECES OF METAL OR OTHER HEAVY MATERIAL TO PRESS THEM INTO A ITS FINAL WIDTH.

Could'nt have said it better myself...

Christian ill talk to him soon I think ill just have him make a sheet of 12 and ill worry about them later... and sell them as i go.

[PROJECTRB240SX]

I can pay for half right now. I just didn't have the full amount. Ask him if he would do a half and half sheet? I can get you a rb25 gasket this weekend. Ohh and on my car I have been having hard luck finding piping for the IC, Sorry.

[WRX to RB25DET]

Christian,

Remember how i told you its hard for me to find 180sx's...well there are 3 1995's, 1 1996's, and 1 1997's, 180sx's I have forsale right now tell Tom or anyone you know that wants one that I can get it here in couple of weeks since we have to fill our container and they are FULL cars. Oh and there are 2 SILVIAs: 1 1993 and 1 1996

[WRX to RB25DET]

I can pay for half right now. I just didn't have the full amount. Ask him if he would do a half and half sheet? I can get you a rb25 gasket this weekend. Ohh and on my car I have been having hard luck finding piping for the IC, Sorry.

Its no prob I cant buy it now I had to get something so i bought a Impreza since im kind of in that business but ill still look into your car!

Shoot me a call

[PROJECTRB240SX]

Ok, you went back to a suby huh. Those are bad arse. how much did you pay? I want a subaru next, gotta build me a rally car.

[WRX to RB25DET]

Ok, you went back to a suby huh. Those are bad arse. how much did you pay? I want a subaru next, gotta build me a rally car.

Its a plain 93 impreza L FWD, but I have everything to make it AWD. i paid 1300 and just did all major tune ups = 200-300 so she is tip top shape. Crapy paint but hey im getting 26-30 MPG!

Ill also be picking up my 240 in Tuscon as soon as i can get a truck and trailer, im only paying 200 for the car!

[PROJECTRB240SX]

THATS COOL, IS IT COMPLETE? SORRY I COULDN'T CALL LAST NIGHT I HAD TO RUN ERRANDS, THEN I HAD TO TROUBLE SHOOT OUR HOME NETWORK (IT SUCKED CAUSE WE ENDED UP WITH NO INTERNET). HE SEND ME PICS OF THOSE CARS AND I'LL TRY TO GIVE YOU A CALL TODAY.

[dareo]

could you just propane torch it? I remember my dirt bike friend having me to that to the copper head gasket on my YZ as i rebuilt the top end.

[WRX to RB25DET]

could you just propane torch it? I remember my dirt bike friend having me to that to the copper head gasket on my YZ as i rebuilt the top end.

dont know but i would sell you one at a discount if you checked and could tell me if it works or not?!