Anyone have stock RB20 mounts sitting around?

[yellow_jacket]

I am looking for a set of stock RB20 mounts. The part that bolts to the block. I don't want to pay much because this is experimental and might not work. Basically, I am trying to put a RB25 in using a R32 crossmember and RB20 mounts. If you can help me out please email me or post here

[email protected]

[mmatl16]

go to http://www.mckinneymotorsports.com

[yellow_jacket]

If I had $600 to give away for motor mounts I would. But I don't. I was going to fabricate my own mounts, but I got hooked up with a R32 crossmember(free) and now a mod on an other board is hooking me up with mounts from a RB20. Should be interesting to see if it works.

So I actually no longer need a set of RB20 mounts.

[Yellow4g63]

If I had $600 to give away for motor mounts I would. But I don't. I was going to fabricate my own mounts, but I got hooked up with a R32 crossmember(free) and now a mod on an other board is hooking me up with mounts from a RB20. Should be interesting to see if it works.

So I actually no longer need a set of RB20 mounts.

Thought they were $400 for the RB20.

[driftjunke]

Blaine, call me I have a set of the mount brackets that bolt to the block, and I have what looks to be a practically brand new pass mount.

Eric

[yellow_jacket]

I'll try and give you a call on Friday.

Blaine

[mmatl16]

Thought they were $400 for the RB20.

if u wanna get technical they were 459 for me after taxes and shipping to the shop

[yellow_jacket]

OK. They've got them listed on their site for $600. That is why I said that

[tight240]

If you have an extra set how much you trying to let go? I have the R32 crossmember but no damn mounts. If it's alot thats ok i will just get regular mounts and i wont have to swap crossmembers.