Anyone have parts diagrams (underplenum hoses)?

[91QAZ]

I have my plenum off and discovered that some of my hoses are hard and brittle (as expected), but most are nice and soft. Checked the service history, and sure enough, about 10K miles ago previous owner had fuel lines and underplenum hoses replaced due to coolant leak (no KS though, so in I go ). Looks like they replaced just about all of them, but must have missed a few of the PCV hoses. Id like to order just those that I need, but would rather not have to visit the dealer to compare hoses. Much easier to call Joe with part numbers if I could figure out what the part numbers are...

Thanks guys.

Tom

[elwesso]

Tom...

have meaning to do tihs for a while... Check this out, for starters... more on the way.

http://infiniti.home.insightbb...s.htm

[91QAZ]

Hey that's pretty handy, Wes. I'm sure I'll reference this when I put everything back together (not looking forward to that part).

Now all I need is a picture (uh, I like purty pictures) to tell me which hose goes with which part number...

Thanks Wes.

Tom

[elwesso]

more on the way......

[91QAZ]

Wes,

Just found that Joe has a partial parts diagram on the everythinginfifniti website. Check out this page and click in "view full image". It's not complete, but I found what I needed:

http://www.trademotion.com/par...=3221

[elwesso]

I saw that Tom, and unfortunately it does not have everything you need... here comes the rest!!!!!!

[elwesso]

yet another

[elwesso]

again

[elwesso]

Greg is going to kill me for all the bandwith im using..... last one

[91QAZ]

Oh yeah. Now THATS what I'm talking about. Thanks Man!

[elwesso]

Heres how yo uuse them.....

There is a parts code on the first column..... That is the part code that is in the pictures..... Then in the next column is the full parts number...

What I did is first seperate all the PCV hoses, water, and air hoses seperately so that I could narrow things down easier..

What I would do, once i got all my stuff ready to reassemble (after i went on my hose destruction mission), is id pick a random hose out of the bag o' hoses i had, and then look at the part number... The cross reference it to the part code, then looks where it goes on the diagram.....