Anyone have any injectors or know the best place to buy?

[rb 90 240]

Shooting for around 360-380 rwhp on my setups and need to get injectors still. Any recommended shops to buy from?

[nizmo zilvia]

Get OEM GTR injectors. They should do the job. If not I'd suggest going with DeatschWerks on ebay for $330 shipped. Any size I think.

[HxC_Nismo]

i have some rb26 gtr 440cc injectors for sale $150 plus shipping, they came off my r33 rb26dett let me know [email protected]

[nizmo zilvia]

What a deal!!

[rb 90 240]

what kind of numbers do you think they will support? Very interested

[BoostFab]

Shooting for around 360-380 rwhp on my setups and need to get injectors still. Any recommended shops to buy from?

i have a set of 460cc (41.91 lb/hr) top feed; let me know if you still need them. they will support your power goal @ 80% duty cycle

[rb 90 240]

Those work on the Greddy style intake though? What are you looking to get out of them?

[HxC_Nismo]

my injectors should be able to handle up to around 450hp and there have really low mileage and they fit in rb20 with no problem you just have to get a injector resistor box from 90-96 v6 honda accord, and some type of fuel controller and you should be set. let me know i accept paypal and i can ship em out tommorow if you like.

[wawazat8402]

BTW, I think Deatschwerks has a Xmas special going on in the advertiser's forum. I would def check them out.

Heres the link:zerothread/295802

[240z4u]

Don't buy venoms. My first set idled like garbage. They sent me new ones with no problems but I don't trust them at all.

Mine are going to deatchwerks to see how close to 550 they are. If they are way off I am ordering deatchwerks injectors (like I should have the first time).

Evan

[Jo240sx]

i have some rb26 gtr 440cc injectors for sale $150 plus shipping, they came off my r33 rb26dett let me know [email protected]

will those fit a rb25 with no problems...if they swap right in ill buy em from you....lmk

[Taterbug]

If I'm not mistaken RB25s are high impedance side feed

[onepuff]

If I'm not mistaken RB25s are high impedance side feed

nice one!

[S14-NEO]

i know there are alot of people out there that swear by the deatchwerks injectors but i honestly dont recommend then at all..my reason is simple, all they do is drill out the nozzle to allow for more flow...and they dont do anyting with the injector coils to handle the additional load..the problems with that is the injectors get hot, and when they get hot the can lock up..when they lock up its never good...it can either lock up with the pintle open which will dump vasts amounts of fuel or it can lock up closed which will cause a cylinder to run dead lean and thus go boom...none of which are good things to happen...just my .02