Any pics of staggered wheel setup on your S13?

[JDMSIL80]

Preferably with 8" front and 9" rear with offset approx +20.I wanna see how much the lip would stick out with a deep dish rims, thanks!

[continental_drift]

mmm, look for pictures of my s13, my rears are x7.5 -5,my fronts are x8 +14,

then use the offset calculator in the sticky, and find the difference between 7.5 -5, and 9 +20.

you should then have a pretty good idea of how far they're going to stick out running comparable camber.the offset calculator will tell you how much more in oroutward.

[Juujai]

it would depend on the wheel design. but with a x9 +20~ its possible to get 4" of lip but it would depend on the face. for instance a 17x9 +20 work s1 meister with an 0 face can get 99mm of lip which is just a tad under 4". so it is fairly easy to fit 4" of lip under stock fenders which is pretty scary. since most cars can't fit that much.

[chmercer]

thats a crappy way to measure. cheater lip is lame. like saying you have 4 inch of lip with 17x7 +45 sa3rs since the spoke curves back so far. my 2 cents.

[Juujai]

yeah that's true lip past the spoke. but still better than no lip there. i notice that too but for some reason advan sa3r doesn't really get much lip even with lower offsets. i guess it should be measured where the wheel is mounted. instead of the end of the curvy spoke. http://rbmotoring.com/gallery/album484/aae looks gay

mesh wheels are probably the type of wheels without cheater lips.