Any one having this problem? help!!!!

Nissan 300ZX technical discussion forum: Maintenance, performance, installations, modifications, how-to's and troubleshooting.
alex859
Posts: 4
Joined: Fri Aug 08, 2014 7:57 am

Post

I have a 96 300zx n/a i just recently bought the car, It had a hesitation at idle so i replaced the air filters and cleaned the tps connectors and maf, After i got done i started the car and it dies in netural but in first gear it will not die and idles around 2 grand but as son as its in netural it dies. Has any one ever had this problem? :werd:


ThisIsSparTTa
Posts: 738
Joined: Wed Sep 26, 2012 6:02 pm
Car: 91 300ZX TT 2+0

Post

Sounds like you have a hose disconnected somewhere or your idle control isn't working properly: http://z32.wikispaces.com/Idle+Control . Also had a similar issue when the wire going to my TPS was broken. Only way I found out was by hooking up Consult to ECUTalk and seeing the sensor reading peaked out.

alex859
Posts: 4
Joined: Fri Aug 08, 2014 7:57 am

Post

When im parked the only way i can start it up is if im in first gear when i ease it into netural i just dies but thank you so much i will check it out and i will let you know what i find

User avatar
RED_DET
Vendor
Posts: 5335
Joined: Tue May 13, 2003 5:07 pm
Car: 2004 Infiniti G35 Sedan 6 spd
2011 Infiniti G37x
1992 Nissan Sentra SE-R SR20DET
Chevrolet Corvette Z06
Location: Louisville, KY
Contact:

Post

What was the TPS voltage reading?


Return to “300ZX (Z32) Technical”