Any ideas on an air intake

[yeahbooiiii]

I have a 2005 g35 coupe automatic. I've been looking for an air intake. Any ideas on which ones are the best?

[smockers83]

Stillen or JWT with the Z tube. Personally I say JWT, but I'm slightly biased.

[Slavik]

I got JWT pop charger and z-tube on order, should receive it at the end of the week .... I'll let you know how it turned out ... I basicaly went with this set up because many peple were happy with it, it seems like performance wise the intakes are very similar, and $200 shipped for the combo sounded like a good price as well ...

[SVTCOBRA]

Got a take-off Z-tube for $15 at Nissan.Reusing my Pathy K&N drop-in filter.Removed the baffle from the bottom of the stock airbox.

Wife's G only has z-tube

[yeahbooiiii]

any idea how this would compare to an injen, aem, or k&n?

[G_whizz]

You will not notice ANY hp difference between these. Minimal gains for intake mods. It's more about sound. If you want to learn more, click the FAQ sticky thread, then go into the Modification Database thread. You will learn pretty much everything you need to know.

I went with JWT and Ztube...

[yeahbooiiii]

thanks, let me know how easy it is to install and how it sounds.

[SVTCOBRA]

thanks, let me know how easy it is to install and how it sounds.

should I warn about cross-wiring the connuter valve with the bi-lateral-phlapazoid

[SVTCOBRA]

Also,

Welcome to Nico!!!!

[Hookm36]

JWT pop charger and Z tube....a MUST ! simple to install, you will be very please with the sound. I have a video clip of the before and after sound, I will try to upload to youtube or something........stay tuned

[Magnet 2112]

JWT says the z tube and pop charger combo adds 6+ hp. Does anyone think that it is more or less and was it a noticeable difference.

[telcoman]

should I warn about cross-wiring the connuter valve with the bi-lateral-phlapazoid

Don't bother! Chica will!

[SVTCOBRA]

oooh....I miss her....it.........NOT....Actually, there were two. I always that the first one was strange. Come here trying to cause stress!! I get enough of that at work.

[TeflonG35]

should I warn about cross-wiring the connuter valve with the bi-lateral-phlapazoid

How about the flux capacitor?