Any advice on aftermarket replacement for fan shroud KA-24

[tumolt]

Hi. I would like to replace that piece of garbage fan shroud and fan blade that came on my engine. I hate plastic and I refuse to buy new parts from the dealer. Old parts from junk cars are not my choice. I replaced them twice, once before finding out motor mounts were bad and had to do it all over again. I also replaced the fan blade (used but no cracks and new fan clutch. The third set is on but when I rev the engine I can hear the blade hit the shroud...pop Hense the reason I asked for advice. Thanks, Matt

[donmada]

take the shroud right out thats what i did i dont think its need u gotta a electric fan on ur radiator right well the shroud just tunnels more air to keep the radiator cool take the shroud off if u want

[jaytv1019]

I second that ^

those fans are junk and just get into the way. Remove it and upgrade the radiator fan to a nicer one if that.

Just my opinion

[180fan]

why do you refuse to buy new parts from the dealer? I can understand if the local dealer is overpriced (many are and for the S-chassis cars there is a reason) but there are other options for a good dealer of oem parts.

A shround on your radiator is a good thing to have. If you're not willing to buy from the dealer, which in this case I'm gonna guess is pretty expensive just because it's a large part, you might want to check the classifieds for someone parting or swapping.

[1995240sxSE]

i have a basically new fan schround, 0 cracks, a clutch fan and blades I will send you for cheap. I can send pics. [email protected] email me for more details.
Modified by 1995240sxSE at 7:33 PM 4/9/2007

[ken240sx]

i'm thinking about taking my shroud off and fabricating an aluminum one thats similar but possibly longer(closer to an rx7) and more efficient, also thinking about a shroud on the other side funneling air into the radiator.