Another Wheel offset question

Post by **Zee** » Thu Jul 12, 2007 7:37 am

I feel really bad about this, but I am just so confused on it. Anyway here it goes... I want to run overfenders all the way around my 240. 20mm in the front and 50mm in the back. Now what would be a good offset and width for this setup. The only other thing I can tell you is that I will lower it roughly 1-2 inches whatever make the wheel look good and that I want to run 18" all the way around. I want the wheels to be staggered. Help me if you can. PLEASE DON'T FLAME. I have been more than my fair share lately.
Modified by Zee at 2:57 PM 7/12/2007

Post by **Zee** » Sat Jul 14, 2007 7:01 am

Bump

Post by **hannibal** » Sat Jul 14, 2007 7:12 am

something around 10" wide and 0 offset in the front and 11" wide and negative offset in the rear...

Post by **adrianfromthecastle** » Sat Jul 14, 2007 7:13 am

damn.. 50mm in the rear?

kay, here's my input, assuming you want a 9/10" staggar 18x9+20 would be flush, so with 20mm fenders up front18x9+0

and for 50mm fenders in the rear18X10 -10 or -20?

Post by **Zee** » Sat Jul 14, 2007 7:26 am

Thanks guys. lol I don't get any replies for 2 days I bump it and I get to in 20 min. Gotta love NICO. lol

Post by **adrianfromthecastle** » Sat Jul 14, 2007 7:30 am

what kinda staggar are you looking to get anyways?

Post by **Zee** » Sat Jul 14, 2007 12:27 pm

I was looking at 8.5 front, 9.5 Rear.

YouTube · Post by **yokota180sx** » Sat Jul 14, 2007 4:37 pm

wait wait wait

s13 or 14

if your going to run 20 and 50syou better be looking at better widths than that

YouTube · Post by **yokota180sx** » Sat Jul 14, 2007 4:40 pm

if its an s13, id say go 18x 9 +0 frontand in the rear depending on how good you are at making stuff fit you COULD go 18x10 +5 or sow theoretically

but its all dependan on your talent to fit wheels hoenstlyif you dont know what your doing when your putting on over fenders, like putting htem on before you do your wheels, then it wont fit.

Post by **Zee** » Sat Jul 14, 2007 5:32 pm

Yes S13 and I don't want to go too big because I don't want any rubbing or anything. Oh and putting on wheels is not exactly rocket science. . Oh and I have a body shop buy that is going to be doing all my body work for me.

YouTube · Post by **yokota180sx** » Sat Jul 14, 2007 5:35 pm

heh, keep thinking thatits harder than you think to put big *** wheels where they shoudlnt be

Post by **ddgsxr504** » Sat Jul 14, 2007 6:00 pm

If S14 with 20/50mm fenders you are going to want to run 18X9.5 with about a -10 or -15/20 if you are balla at fitment like yokota suggests.

On the rear you will want a 10 or 11 width with a -28 for 11/-32 for 10 or a -35 baller.

I know the car is S13 but I'm throwing it out there in case noobs run across this thread.

Post by **Zee** » Sun Jul 15, 2007 5:10 am

yokoto- I know what you are saying and a person that has worked on cars before will be able to make wheels fit with no problem. I understand that you are saying that a newb to cars wouldn't be able to.

ddgsxr504- Good thinking!

YouTube · Post by **yokota180sx** » Sun Jul 15, 2007 11:09 am

depends on how you mean fitHow i fit wheels? No, mostlikely you wont get it right the first time

How most other people fit wheels, yeah you can prolly do itim slightly more extreme than most

Post by **Zee** » Mon Jul 16, 2007 3:55 pm

Well not everyone can be a baller like you. I can be extreme as you I need to have my tire actually fit my entire wheel. lol jk. Anyway, yeah I don't want stretched tires or anything like that.

Post by **ddgsxr504** » Mon Jul 16, 2007 7:28 pm

Baller!!!

YouTube · Post by **yokota180sx** » Mon Jul 16, 2007 7:55 pm

then your going to have to be slightly sunken

Post by **Zee** » Tue Jul 17, 2007 4:27 pm

Bump...wow what the hell I can't find any rims that run the sizes that you guys told me

18x9 0 offset18x10 +5 offset

Could you guys please HELP!?!

YouTube · Post by **yokota180sx** » Tue Jul 17, 2007 5:43 pm

becuase your looking at cheap *** wheels

Whats your budget, lets see waht we can do about getting something baller and new

Post by **Zee** » Wed Jul 18, 2007 2:15 am

I really don't want to spend anymore than $2000 for all 4 wheels. That doesn't include tires that is just the wheel budget. Thanks yokota for the this you have already been a big help. Thanks again.

YouTube · Post by **yokota180sx** » Wed Jul 18, 2007 2:23 am

dude i can get you wheels for less than 1700 to your doornew and used

Post by **Zee** » Wed Jul 18, 2007 2:38 am

Really cool lets see some examples.

Post by **ddgsxr504** » Wed Jul 18, 2007 7:23 am

Zee wrote:Really cool lets see some examples.

How about you google these links (to start) and find something you like and then he'll get you a price and shipping quote.

http://www.mackinindustries.co....htmlhttp://www.mackinindustries.com/md/rays/volk.htmlhttp://www.workwheelsusa.com/wheels/

Post by **Zee** » Wed Jul 18, 2007 8:52 am

I have already checked Mackin Industries, and I don't like work wheels. To give you an idea these are the ones that I like to begin with but can't find the right offset for.

http://www.discounttire.com/dt...ar=35

YouTube · Post by **yokota180sx** » Wed Jul 18, 2007 10:37 am

what about Origin wheels?

super cheapim talkin glike 1300 to your door cheapand they are actually pretty good as well.offsets avaliable are17x9 +3017x9.5 +3017x9.5 +15

great offsetsid run a 9.5 all around

Post by **gumby74** » Wed Jul 18, 2007 4:39 pm

If this kid doesn't jump on those, I just might.Anything in a 5 spoke in similar sizes/ offsets/ price range? Curious.

Post by **Zee** » Wed Jul 18, 2007 5:06 pm

Amazing wheels. Yokota- You wouldn't happen to have the website I could get them from. I know I am asking a lot, and I thank you so much for it.

Post by **ArticDragon192** » Wed Jul 18, 2007 5:15 pm

If only they made them in 18s ;_; Oh well, Gravity here I come.

YouTube · Post by **yokota180sx** » Wed Jul 18, 2007 5:20 pm

yeha the M2 Hanabai DT05Rs are 17s as wellLook like the BEE R Wheels17x7.5 +25 in 5 lug +15 /+25 in 4 lug

17x8.5 +25/+35 in 5 lug +25/+35 in 4 lug

17x9.5 +30/+35 in 5 lug +30 in 5 lug

You get the wheels through me zee

Post by **Zee** » Wed Jul 18, 2007 5:59 pm

Got anything in 18. I don't really want to go 17s because I have them on my car now and they look too small

Another Wheel offset question

Another Wheel offset question

Re: Another Wheel offset question (Zee)

Re: Another Wheel offset question (Zee)

Re: Another Wheel offset question (Zee)

Re: Another Wheel offset question (adrians_s13)

Re: Another Wheel offset question (Zee)

Re: Another Wheel offset question (adrians_s13)

Re: (yokota180sx)

Re: (yokota180sx)

Re: (Zee)

Re: (yokota180sx)

Re: (yokota180sx)

Re: (Zee)

Re: (yokota180sx)

Re: (Zee)

Re: (Zee)

Re: (yokota180sx)

Re: (yokota180sx)

Re: (Zee)

Re: (yokota180sx)

Re: (Zee)

Re: (ddgsxr504)

Re: (gumby74)

Re: (gumby74)

Re: (yokota180sx)

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums