another failed clutch

[evildky]

fadinza flywheel, Nismo Disk and CF Pressure Plate all dead nowI know it was slipping a bit before the last race and co-drove it this past weekend and now I's all gone, the pressure plate is carcked the friction material is all shreaded off and looks like the flywheel was in a bonfire, Competition Clutches and a bigger flywheel are on deck to install next, I head they handle 500 whp which is a bit further than I plan on going

[srdrps13]

im guessing this motor isn't stock ? i dont see how a flywheel could go wrong on you... get a more appropriate clutch for your power that you're putting down

[nsrZ32]

im guessing this motor isn't stock ? i dont see how a flywheel could go wrong on you... get a more appropriate clutch for your power that you're putting down

Lots of hardcore clutches out there that can handle race duties.

[NSR_s30]

OS GIKEN

[evildky]

I'm guessing 300 to 300o whp right now (dyno in a coupla weeks) I ran the 12.6 with this clutch slipping the whole way, it's pretty much a race only car and it has taken about a year worth of abuse, but when it failed it went out pretty quick and a bit more dramatic than the past 2 clutches

once I upgrade th4e cluthc and upgrade to a copper headgasket I can turn the boost up and get more like 400whp, but I was getting head seepage at 14 psi and decided not to press my luck and the clutch wasn't holding at 14 psi

[jEzTeR]

Hammer Dave!