Anodized Fender Bolts!!! Black & Silver Now Availiable!

[Broadfield]

is the guy open to color recomendations? if so iv heard1.green2.black

if he will take recomendations we could set up a vote and send him arecomendation for the 2 favorites that need to be added.

I would buy them if they came in black!

[ddgsxr504]

Baller.

[Dano]

Black and Silver now availiable. Pics in first post.

-Dan

[Driftless240]

I just may pick up a Black Set in the near future, gotta switch out the Driver Side Fender anyway, heh.

[180sxfaktory]

I had been looking for someone to make these for a little over a year since the gu that used to make them on Hondatech passed away tragically. Anyways I've found someone that makes these and has them up for sale and I wanted to share it with you guys. If you don't like them, cool, don't post. Thanks.

If your interested in some, the guy sells them for $15 shipped a set, (Sold in sets of 8 Only [Includes 8 washers and 8 stainless allen bolts]) then email me 3 things listed below and the guy will send you an invoice to pay through paypal. Right now that's the only payment he deals with:

1) Your order inquiry (how many sets)2) Your paypal address3) Color or colors if you want different colored sets (can't mix match 1 set though)

His price list:1 set 8pcs bolts 8pcs washers $15.00 shipped 2 sets 16pcs bolts 16pcs washers $30.00 shipped3 sets 24pcs bolts 24pcs washers $45.00 shipped4 sets 32pcs bolts 32 pcs washers $60.00 shipped5sets 40pcs bolts 40pcs washers $75.00 shipped6sets 48pcs bolts 48pcs washers $90.00 shipped7sets 56pcs bolts 56pcs washers $100.00 shipped save $5.008sets 64pcs bolts 64pcs washers $110.00 shipped save $10.009sets 72pcs bolts 72pcs wahsers $120.00 shipped save $15.0010sets 80pcs bolts 80pcs wahsers $130.00 shipped save $20.00

Also, these are the only colors availiable at this time.



BLACK AND SILVER NOW AVAILIABLE!



Here's my before pic:



And after:



And some other shots:



Again, I'M NOT THE ONE MAKING THESE, I just found a guy that is selling them.

I'll have more pics of some, if not all the colors installed soon as my friends have taken a liking to these as well. My email is [email protected].

-Dan

Ok... You aren't making these, but how can anybody order these? Are you the salesperson? I wouldn't mind stocking these.

[TRBOMOFO]

those are sweet i want some who do i contact

[yokota180sx]

this guy needs to get real on his quantity discountsi want 6 sets, but im not paying that much.70 for 6 is a good deal

after 4 sets he should offer discounts...

[KFL]

+1 on the discount for at least 3sets or more even if its 2,3 dollars

How much threading is on these bolts.(length)

[180sxfaktory]

Ok, I found out who makes these pieces. R1WURKS. A seller on eBay with the handle "snappyshining" sells them.

http://cgi.ebay.com/ebaymotors...d=1,1

The guy has a 100% rating and has been selling on eBay since 24 AUG 04, and these pieces are made for other vehicles besides the thread pitch for Nissan/Infiniti. He does a lot of business with the 4AG crowd. I feel confident enough to have just made a purchase of 80 pieces (don't worry, I only took 40 black, 20 blue and 20 gold)

The pricing and the quantities are as stated here from the OP.

[Dano]

Yep, that's him.

Email me your name, paypal addy and color and quantity and he'll send you an invoice.

I'm not his salesperson, I had contacted him asking if it was ok to share this with all of you and he said this was a good way to keep track of it, so that's why i'm sending him your info and he's sending you an invoice. I've already passed on a bunch of orders so join in!

-Dan

[180sxfaktory]

I already bought the 80 pieces via eBay and paid with PayPal. You can tell him that I heard about this product from NICO/you if you are getting some bennies for passing the word. My handle is the same as it is here "180SX FAKTORY" [email protected] [email protected].

I already paid, so I don't need a money request. Thanks for turning me on to these beauties! Tell Steve that I'll be more than happy to do a write up for his product.

[Dano]

No worries, I'm just glad these are availiable to us now! It's all about the cool little details, ya know!

-Dan

[180sxfaktory]

Yes, it is, and coincidentally, yesterday at the garage, we were replacing the fender and light bracket bolts on my latest S chassis creation, and we almost went out to buy some new zinc anodized OEM pieces. I'll just wait for the ones I bought from Steve.

Lots of places for these beauties when they get here! I am sure there are spots on the engine where one can replace the hum drum OEM pieces with those fanatastic creations from Steve- Coil pack cover, coil packs, valve cover if used in conjunction with the OEM rubber grommets, the oil pump bolts, the water pump pulley and probably a lot of places inside

[Dano]

Yep, exactly, that's why we had to order more than one set!

BTW, your motor look beautiful!

-Dan

[180sxfaktory]

Thanx! I can't wait to debut it here in a few weeks.

Also, I'm working on FAYCEOFF's 240SX here in Bahrain. The first VG30DETT swap for someone outside the Middle East.

[Dano]

Awesome!

-Dan

[s14tan]

do they come in a green color? email me [email protected]

[180sxfaktory]

do they come in a green color? email me [email protected]

If you read this thread from the beginning, there's no green. Colors are as stated- black, silver, blue, purple, gold and red.

[Dano]

Hahaha, thanks Dale.

I put in a request for green and pink but no telling if he'll make them or not, so don't get your hopes up yet.

-Dan

[kornaz]

Very nice. Will have to order some in near future.

[nwmrkt]

how many "sets" do you guys think I would need to do my s13 up? Generally speaking meaning all of the usual good places on the car....

[Dano]

It all depends on your motor and bay setup honestly. I'm not going to tell you a set number of sets because I think you should go pop your hood and actually figure out what you want to replace. These will replace all of your 10mm bolts under 3/4"... but you can also always buy the set for the washer and get your own allen bolts in any length from your local ACE or other hardware store, keep that in mind too.

-Dan

[Dano]

I added some more bolts to my bay and found another use for these too!

Now grace the power steering resovoir and cooling panel. (Note, would look a lot better in a bay like Dale from 180sxFaktory!)





And today I added some bling to my new mountain bike:

front



Rear



-Dan

[180sxfaktory]

I added some more bolts to my bay and found another use for these too!

Now grace the power steering resovoir and cooling panel. (Note, would look a lot better in a bay like Dale from 180sxFaktory!)





And today I added some bling to my new mountain bike:

front



Rear



-Dan

Hahaha! Yeah! I am waiting on mine to finish out the 200SX! These pieces are fanfukkintastic! I like how these really enhance your bay, bro!

Wow! That's where I've seen these pieces before! Your bike! I mean, in Japan, I see these things on sport bikes and on brake pieces for bikes.

[Dano]

Hehe, yep, they're so sweet! Dale, do you have AIM?

-Dan

[180sxfaktory]

I used to have AIM, but I got rid of all that chat stuff bcuz someone had hacked it.

Anyway, I just got my 80 pieces from Steve today! Super silky sexy stuff! I'll take some pics tonite of some of the uses I put them to in the 200SX!

[Fu-king]

this guy needs to get real on his quantity discountsi want 6 sets, but im not paying that much.70 for 6 is a good deal

after 4 sets he should offer discounts...

No kidding, thats a lot of scratch for some bolts. I would get them but only after I bought all the things for my car that matter. They do look good.

[180sxfaktory]

I got these a while back from the source. Since my 200SX is championship white and black, I am using the black anodized pieces in the bay and in a few other areas.











I am using the silver ones around the chassis area. This is one example of one location for the secondary clutch reservoir/splitter (that big chunk of brass that polishes up really nicely)




Modified by 180sxfaktory at 7:10 PM 7/27/2007