Aluminum Driveshaft?????

Post by **nissan_s13** » Fri Jan 21, 2011 9:49 am

I'm thinking about getting an aluminum driveshaft. I've been researching and I think this would be a good investment for now. Does anyone know of the quality of this driveshaft? I found it on 240sxmotoring.com....

here is the link..

http://www.240sxmotoring.com/24onepialdrs.html

lmk what you guys think. Any input is appreciated.

Post by **biggie** » Fri Jan 21, 2011 10:05 am

They are a Vendor and I'm sure its fine.

Can also look at Shaftmasters, another Vendor.

Post by **94_240sx** » Fri Jan 21, 2011 10:30 am

I have one from Shaftmasters. I can vouch for the quality and it was cheaper too.

Post by **biggie** » Fri Jan 21, 2011 10:34 am

Should have mentioned my Coupe one is from Shaftmasters as well:

Post by **S14Kouki10** » Fri Jan 21, 2011 11:04 am

what are the gains from 1 piece driveshafts?

Post by **biggie** » Fri Jan 21, 2011 11:07 am

S14Kouki10 wrote:what are the gains from 1 piece driveshafts?

Less weight and no clunking of the 2 piece, especially when the carrier barring goes bad.

Post by **ILoveMyRHS13** » Fri Jan 21, 2011 11:34 am

94_240sx wrote:I have one from Shaftmasters. I can vouch for the quality and it was cheaper too.

Same here. I love my aluminum driveshaft.

Post by **scotty-2-forty** » Fri Jan 21, 2011 11:52 am

On my wishlist for quite some time now. Just a note, any high-power car should consider a safety loop as well.

Post by **numbnuts240** » Fri Jan 21, 2011 12:00 pm

anything from 240sxmotoring is top notch. this includes customer service. jeff and the crew are awesome.

Post by **nissan_s13** » Fri Jan 21, 2011 1:35 pm

Thx for the quick replies guys! Much appreciated! Will look into shaftmasters and see which one i'll get then.

Post by **OutToWinPAHC** » Fri Jan 21, 2011 6:37 pm

I got that hoop, but I use a driveshaft shop alum one piece

Post by **s13sickboi** » Fri Jan 21, 2011 7:24 pm

S14Kouki10 wrote:what are the gains from 1 piece driveshafts?

i personally dont know the gains of a TWO piece driveshaft. makes it a pain in the fuggin a$$ to install! one peice, quick, simple. + aluminum = light

numbnuts240 wrote:anything from 240sxmotoring is top notch. this includes customer service. jeff and the crew are awesome.

x2

Post by **ShadowsFa11** » Sat Jan 22, 2011 9:51 pm

Shaftmasters is the way to go. Good pricing as well.

Post by **Caveit77777** » Sat Jan 22, 2011 10:22 pm

Why exactly does it matter whether or not your model has abs or not when buying a driveshaft?

Post by **Razi** » Sat Jan 22, 2011 10:33 pm

Cars with ABS have a sensor in the diff, which makes the diff longer.
Which requires the driveshaft to be shorter.

Post by **revolutionz_s13** » Sun Jan 23, 2011 10:39 am

Anyone here have experience with the jgy customs aluminum driveshaft? I got a line on one for cheap, just a little on the fence about it....

Post by **nissan_s13** » Mon Jan 24, 2011 3:53 pm

Are the shafts for the kae and kade the same?

Post by **Razi** » Mon Jan 24, 2011 4:14 pm

Yep.
The E and DE use the same driveshaft.

Post by **nissan_s13** » Mon Jan 24, 2011 4:32 pm

sweet

Aluminum Driveshaft?????

Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Re: Aluminum Driveshaft?????

Nissan Forums

Infiniti Forums

Datsun Forums

Technical Forums

Classifieds / Marketplace

Nissan Motorsports

General Forums