all gears hard to enter...help please rb20det

[gbaz77]

hey guys,

i know i have an rb and there is a forum for that, so i have posted there. this issue is related to the clutch/transmission and i think is less if not un-engine specific.

heres my most recent issue im trying to deal with. occasionally it feels as though my gears arent going in very smoothly. sometimes they go in better than other times.

i did a test, and at a complete stop with the engine running i tried to enter all gears with the clutch pressed down of course.

it seems that if i take it into each gear slowly, it will grind a little. and if i bring it in really slowly, almost leaving it in half way or so in each gear, it will grind longer. but if i bring it in fast, it wont grind. somehow i doubt that each of my gear syncros are shot.

what could cause this? thanks guys. btw, i recently put new lucas 80/90 gear oil in with lucas stabilizer.

[gbaz77]

bump....comon guys any help is appreciated.

[180fan]

somethin tells me your clutch aint gettin disengaged when you push the pedal. Adjust your pedal and make sure your master/slave aint shot.

[gbaz77]

could this be at all because i used the stock KA slave and master, instead of the RB slave and/or master?