Alignment Shop, New York City

Forum for Nissan wheel fitment, tire selection, suspension setup and brake discussions.
markoo
Posts: 5
Joined: Sat Mar 05, 2005 8:12 am

Post

HowdyAfter searching here,grassroots motorsports , etc- i havent been able to find a reputable (gooD) alignment shop for my 95 240sx KA-T with KAZAMA tension rods,RUCAs and Toe control arms. The car also har MR coilovers and 1 inch drop- Im puting in about -3 to 4 degrees for kuhmo victoracers for autox. I'd appreciate any help for the ny city, long island, north jersey area shops! Thanks!


whiterps13
Posts: 4217
Joined: Sun Jul 27, 2003 9:45 am
Car: white LE hatch

Post

I had trouble here too. Nobody could get it on their alignment racks, my car is too low. Try going to a performance shop and see where they take their cars. I ended up asking around and a pefromance shop knew someone who did racecar alignments.

StanBo
Posts: 430
Joined: Wed Jul 31, 2002 11:28 am
Car: 93 Mazda Miata
10 Toyota Tacoma

Post

I have a shop 10mins from my house in Staten Island that will handle your parts as well as corner weight your car if you like.

Hit me on email for the information. He is part of my car club http://www.ifxcc.com.

Legit tire shop he just tailors to track guys and his son has started to drift with us.
markoo wrote:HowdyAfter searching here,grassroots motorsports , etc- i havent been able to find a reputable (gooD) alignment shop for my 95 240sx KA-T with KAZAMA tension rods,RUCAs and Toe control arms. The car also har MR coilovers and 1 inch drop- Im puting in about -3 to 4 degrees for kuhmo victoracers for autox. I'd appreciate any help for the ny city, long island, north jersey area shops! Thanks!

StanBo
Posts: 430
Joined: Wed Jul 31, 2002 11:28 am
Car: 93 Mazda Miata
10 Toyota Tacoma

Post

markoo wrote:HowdyAfter searching here,grassroots motorsports , etc- i havent been able to find a reputable (gooD) alignment shop for my 95 240sx KA-T with KAZAMA tension rods,RUCAs and Toe control arms. The car also har MR coilovers and 1 inch drop- Im puting in about -3 to 4 degrees for kuhmo victoracers for autox. I'd appreciate any help for the ny city, long island, north jersey area shops! Thanks!
I have a shop 10mins from my house in Staten Island that will handle your parts as well as corner weight your car if you like.

Hit me on email for the information. He is part of my car club http://www.ifxcc.com.

Legit tire shop he just tailors to track guys and his son has started to drift with us.

naed240sx
Posts: 4400
Joined: Wed Apr 27, 2005 8:15 am
Car: .....

Post

whiterps13 wrote:I had trouble here too. Nobody could get it on their alignment racks, my car is too low. Try going to a performance shop and see where they take their cars. I ended up asking around and a pefromance shop knew someone who did racecar alignments.
My car is lower than yours and fit's on a hunter alignment rack (standard rack) just fine. They lay down 2x4s in front of the rack to extend the ramps.

After getting it up, have the guy setup the car for the aligment, and then do any aftermarket adjustments yourself.


Return to “Nissan Tires, Wheels, Brakes and Suspension”