alarm system removal

The Internet's ONLY forum for 240sx convertible information and the official home of the 240sx Convertible Club of America!
93s13vert
Posts: 10
Joined: Sun Mar 13, 2011 8:49 pm
Car: 1993 240sx vert

Post

so i removed the viper c30 out of my vert. but since half the wires were done like dooodoo i cut them as close to the wires they where connected too and taped them off so they dont touch any metals and short some thing. i had to reattach my ignition wire as well since that was wired to the alarm box.. has any body ever removed theres? and did it cause any issues after words? i have the one black plug that goes into the box the diagnostic plug and then one extra plug wich has nothing what so ever to connect to.. any info wld be very help ffull. i removed the alarm cuse it was done poorly and was a cluster f of wires where my clutch pedal is gonna go..


thanks!


User avatar
OutToWinPAHC
Posts: 8810
Joined: Thu May 31, 2007 12:19 pm
Car: 2015 Chevy Silverado
Nissan Skyline R33 GTS-t
Nissan Skyline R32 GTR
Nissan RB20 E46 RHD
2015 Harley Vrod Muscle
1990 Nissan Patrol
Location: PA
Contact:

Post

I removed a remote start and alarm before, just cut and soldered back to factory, I used the FSM for schematics.

93s13vert
Posts: 10
Joined: Sun Mar 13, 2011 8:49 pm
Car: 1993 240sx vert

Post

did it cause any problems with the car starting or any thing? and the only wire i had to solder back to gether that i cld see was my ignition wire and a red with blue stripe wire. the rest were able to be cut outand pulled thru the fire wall or run to this one black plug that was plugged into the alarm box wich looks to me like its a part of the dash harness


Return to “240SX Convertible Forum”