AIRBG LIGHT

[Versafy]

put a radio in today and now my airbag light flashes the whole time i drive anyone got an idea what might be going on????

[AG]

You disconnected the light while installing I guess.

Search the forum, this issue was discussed before.

[Shad0wXCalibur]

This is a guide someone posted for me when I had that problem.

As long as the airbag hasn't ACTUALLY been depolyed, this will reset the system. 1.Turn the key from off to on. 2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key to acc instantly. 3. Count to 5 (1 Mississippi, 2 Mississippi . . . .) 4. Repeat steps 1-3 two more times until you have done the cycle three times. 5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry. 6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.

[reyes1212]

That worked for me...so happy now.Probably going to happen again when I install my Nardi Deep Corn on Wednesday...lol

[Shad0wXCalibur]

Just so everyone knows, you don't have to unplug the airbag light. The entire light comes off the dash piece.

[Versafy]

yea thanks everyone it did work!

[reyes1212]

Real fun...I'm just worried that since I'm going to be taking my driver's side airbag, that it won't reset?

[They Call Me Whatshisname]

Hey versafy which radio did you get? I have an alpine one in my old car that's not moving that I wanted to use but I'd have to get a conversion kit.