Post by
Hate imports »
https://forums.nicoclub.com/hate-imports-u186344.html
Tue Jun 21, 2011 8:35 pm
Since some of you guys here are new owners I thought I'd save you a trip to the dealer once your airbag light starts blinking. I'm not sure what set's it off, but at some point you will likely end up with a flashing airbag sensor light. Here is how to reset it yourself, it really works.
(For Keyless start vehicles, turn vehicle on and off as directed below)
1. Turn the key from off to on.
2. Watch the airbag light closely. It will stay on for a few secs. and then as soon as it blinks off (the start of the flashing), turn the key off instantly.
3. Count to 5 (1 Mississippi, 2 Mississippi . . . .)
4. Repeat steps 1-3 two more times until you have done the cycle three times.
5. Now turn the key on and watch the light. It will start blinking in a different, slower manner. This is diagnostic mode. You can watch this for a little while, no hurry.
6. Now turn the key off again, Count to 5 like in step 3 again, and turn back on. If the procedure worked, the airbag light will not be flashing.
Hope this helps.. and yes I still hate imports.