Air Mix Motor help...........

[Steve Lloyd]

My air mix motor is dragging, it needs a little help to move between setting going in a clockwise direction. Going counterclockwise it moves just fine. I've sprayed silicone lubricant on the plastic that the linkage tracks through and it didn't help. Anything else I can do?????????? I really don't want to replace it since it works, it just gets hung up and certain points.

[blacksrjdm]

If it is getting hung up, then you need a new actuator. The getting hung up part, means the gear is missing teeth inside, or, just that the actuator is getting old and the motor is weak. They are cheap enough, suck it up and buy a new one...