I just picked up a brand spanking new one in trade for my 35R. Anyone familiar with these journal bearing turbos? I know the SRT4 guys love em, but having trouble finding other vehicles with them.
Here's some of the info....
"This is the very popular and proven AGP specific turbocharger. After years of perfecting wheel combinations, AGP now offers a quick spooling, excellent performing 48lb/min turbo in a variety of flavors. Designed and built by AGP, this turbo is the way to go with your 4 or 6 cyl engine with power goals up to 480 horsepower.
Compressor Specs:- Polished AGP Cast T04E housing 3" inlet 2" outlet- AGP Special Sauce compressor wheel 48lb/min"
It currently has a .48 turbine housing, I will be changing this to a .63 so its more suited for the RB25DET application.
I plan on running with this turbo with 740cc injectors, FMIC, and PFC.
AGP Delta 48 Turbo
-
SullivanRacing06
- Posts: 1974
- Joined: Sat Apr 21, 2007 8:45 am
- Car: r32 gtst, 06 350z, r32 gtr, rs4 steaga, 04 350z, f350/6bt
- Location: Gainesville
Re: AGP Delta 48 Turbo (GSDKinked)
i have the .63 on my integra since 05 , love it
-
GSDKinked
- Posts: 542
- Joined: Thu Jul 17, 2008 7:44 am
- Car: 1997 240SX LE
- Location: West Chester, Pa
- Contact:
Re: AGP Delta 48 Turbo (SullivanRacing06)
When do you hit full boost on your teg?SullivanRacing06 wrote:i have the .63 on my integra since 05 , love it
-
S13_RB25
- Posts: 556
- Joined: Thu Jan 14, 2010 5:20 am
- Car: A 240 but no RB yet!
- Location: Burlington, NJ
Re: AGP Delta 48 Turbo (GSDKinked)
there's website, compturbo.com, they make pretty good turbos. Even triple ball bearing for even faster spool.
-
GSDKinked
- Posts: 542
- Joined: Thu Jul 17, 2008 7:44 am
- Car: 1997 240SX LE
- Location: West Chester, Pa
- Contact:
Re: AGP Delta 48 Turbo (S13_RB25)
This doesn't answer my question but thanks.
-
SullivanRacing06
- Posts: 1974
- Joined: Sat Apr 21, 2007 8:45 am
- Car: r32 gtst, 06 350z, r32 gtr, rs4 steaga, 04 350z, f350/6bt
- Location: Gainesville
Re: AGP Delta 48 Turbo (GSDKinked)
3800-4000 on a 2.2l b series
turbo dose not run out of top end over 9500rpm
turbo dose not run out of top end over 9500rpm
-
GSDKinked
- Posts: 542
- Joined: Thu Jul 17, 2008 7:44 am
- Car: 1997 240SX LE
- Location: West Chester, Pa
- Contact:
Re: AGP Delta 48 Turbo (SullivanRacing06)
What exhaust housing are you using? .48? .63?, .82?SullivanRacing06 wrote:3800-4000 on a 2.2l b series
turbo dose not run out of top end over 9500rpm
-
SullivanRacing06
- Posts: 1974
- Joined: Sat Apr 21, 2007 8:45 am
- Car: r32 gtst, 06 350z, r32 gtr, rs4 steaga, 04 350z, f350/6bt
- Location: Gainesville
-
maverick06xx
- Posts: 66
- Joined: Thu Jan 24, 2008 7:43 am
Re: AGP Delta 48 Turbo
Sullivan i have the same turbo for my built sr20det, i have 272 bc cams and supertech 1mm oversize valves and wanted to know if this turbo can get me near the 450whp mark? my head will be ported and polished with the following componets and bc valve springs and retainers, also with isis intake manifold port matched and a peak boost top mount manifold port matched...i wanted to know also will these cams help this turbo preform without dropping out or power band before 7500 rpms...? i have the .63 a/r as well.