Aftermarket radio wiring.....

A great resource for Nissan Sentra, Infiniti G20, 200sx, Pulsar, NX1600, NX2000, Tsuru, Primera and Sunny owners.
User avatar
CentralFLSentraSE-R
Posts: 61
Joined: Tue Mar 11, 2008 1:50 am
Car: 2005 Nissan Sentra SE-r

Post

This was a huge pain in the a**. I purchased a wire harness adapter off of eBay, which will never do again. It took my today alone 2 hours to get the radio in working condition. I had to rearrange the harness connectors so that they matched up. Now i am having the issue of the radio is not saving any of the settings; so every time i turn the radio off it erases the settings.

and BTW if anyone wants the wiring setup for the 2005 Sentra SE-R i can get the info and post it for future referrance to save someone else the headache.


User avatar
CentralFLSentraSE-R
Posts: 61
Joined: Tue Mar 11, 2008 1:50 am
Car: 2005 Nissan Sentra SE-r

Post

Here it is. I used a tester to determine the constant and the accessory (ignition). Then one by one I matched the speaker wires. I rearranged the connectors to the layout below. **** This is garrunteed to work on the 2005 Sentra SE-R with factory subwoofer and amp.*********This may not apply to other years, not sure.****



***** The front right and front left speakers on the connector are on top of eachother, the positive is on top side and negative on bottom, displayed below.*****



Have fun.
Modified by CentralFLSentraSE-R at 8:00 PM 9/9/2008


Return to “Sentra Forum / Infiniti G20 Forum / Pulsar / NX Forum”